Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black square 60 by 60 by 20 mm case fan with two pins

Zyvpee

Zyvpee DFD0612H 60x20mm 12V .15A 2-pin ball bearing case fan

SKU CH-VCGF-C3PZD

A 60 mm square case fan with ball bearing, 12 V power, 2500 to 2999 RPM and 25 to 30 dBA noise

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • RPM2500-2999 RPM
  • Noise Level25 - 30 dBA
  • Power Connector2 Pin
  • Quiet operation at 25-30 dBA for low-noise builds
  • Ball bearing design extends service life under continuous use
  • Compact 60x20mm frame fits tight chassis spaces
  • 12V 0.15A draw keeps power demand minimal
  • Two-pin connector enables simple motherboard or controller hookup

Compact 60 mm case fan for tight builds

This 60 by 20 mm frame fits small-form-factor chassis and rack-mount servers where larger coolers cannot be installed. It runs on 12 V at 0.15 A through a two-pin connector. The ball-bearing motor is rated for continuous operation in black, non-illuminated housings.

Replaces noisy sleeve-bearing fans in the same

When an existing 60 mm fan develops rattle or fails, this unit drops in without re-wiring. The jump is worth it if the current cooler exceeds 30 dBA or spins below 2500 RPM, because the ball bearing keeps acoustic output between 25 and 30 dBA while sustaining 2500 to 2999 RPM.

Moves modest airflow through restricted grilles

The DC square cooler design handles spot-cooling VRM heatsinks, drive cages or single-slot GPUs in cramped layouts. It runs out of headroom when the thermal load demands more than the 60 mm blade span can push through dense mesh or long ducts.

Puncte forte

  • Quiet operation at 25-30 dBA for low-noise builds
  • Ball bearing design extends service life under continuous use
  • Compact 60x20mm frame fits tight chassis spaces
  • 12V 0.15A draw keeps power demand minimal
  • Two-pin connector enables simple motherboard or controller hookup

Specificații

SeriesDFD0612H
ModelDFD0612H
TypeCase Fan
CompatibilityCase
Bearing TypeBall
RPM2500-2999 RPM
Noise Level25 - 30 dBA
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*20mm

Întrebări despre acest articol

Will the 60 mm square frame with 20 mm depth fit my case fan slot?

The fan measures 60 mm by 60 mm by 20 mm, so it fits any standard 60 mm mounting pattern with at least 20 mm clearance.

How do I connect the 2-pin power connector correctly?

Align the two wires with the motherboard or controller header; the plug is keyed to prevent reverse insertion.

When should I expect to replace the ball bearing fan?

Ball bearings typically last tens of thousands of hours; plan replacement when noise rises above the rated 25-30 dBA range.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.