Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black square 60 by 60 by 20 mm case fan with two pins

Zyvpee

Zyvpee DFD0612H 60x20mm 12V .15A 2-pin ball bearing case fan

SKU CH-VCGF-C3PZD

A 60 mm square case fan with ball bearing, 12 V power, 2500 to 2999 RPM and 25 to 30 dBA noise

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • RPM2500-2999 RPM
  • Noise Level25 - 30 dBA
  • Power Connector2 Pin
  • Quiet operation at 25-30 dBA for low-noise builds
  • Ball bearing design extends service life under continuous use
  • Compact 60x20mm frame fits tight chassis spaces
  • 12V 0.15A draw keeps power demand minimal
  • Two-pin connector enables simple motherboard or controller hookup

Compact 60 mm case fan for tight builds

This 60 by 20 mm frame fits small-form-factor chassis and rack-mount servers where larger coolers cannot be installed. It runs on 12 V at 0.15 A through a two-pin connector. The ball-bearing motor is rated for continuous operation in black, non-illuminated housings.

Replaces noisy sleeve-bearing fans in the same

When an existing 60 mm fan develops rattle or fails, this unit drops in without re-wiring. The jump is worth it if the current cooler exceeds 30 dBA or spins below 2500 RPM, because the ball bearing keeps acoustic output between 25 and 30 dBA while sustaining 2500 to 2999 RPM.

Moves modest airflow through restricted grilles

The DC square cooler design handles spot-cooling VRM heatsinks, drive cages or single-slot GPUs in cramped layouts. It runs out of headroom when the thermal load demands more than the 60 mm blade span can push through dense mesh or long ducts.

Pontos fortes

  • Quiet operation at 25-30 dBA for low-noise builds
  • Ball bearing design extends service life under continuous use
  • Compact 60x20mm frame fits tight chassis spaces
  • 12V 0.15A draw keeps power demand minimal
  • Two-pin connector enables simple motherboard or controller hookup

Especificações

SeriesDFD0612H
ModelDFD0612H
TypeCase Fan
CompatibilityCase
Bearing TypeBall
RPM2500-2999 RPM
Noise Level25 - 30 dBA
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*20mm

Perguntas sobre este artigo

Will the 60 mm square frame with 20 mm depth fit my case fan slot?

The fan measures 60 mm by 60 mm by 20 mm, so it fits any standard 60 mm mounting pattern with at least 20 mm clearance.

How do I connect the 2-pin power connector correctly?

Align the two wires with the motherboard or controller header; the plug is keyed to prevent reverse insertion.

When should I expect to replace the ball bearing fan?

Ball bearings typically last tens of thousands of hours; plan replacement when noise rises above the rated 25-30 dBA range.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.