Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 60x38mm 12V server case fan with four-pin connector

Zyvpee

Zyvpee PSD1206PMBX-A 60x38mm 12V 18W 4-pin case fan

SKU CH-F1MC-S8VD6

12 V, 18 W server-grade 60 × 38 mm case fan with 2-ball bearing spinning above 7000 RPM on a 4-pin connector

  • TypeCase Fan
  • Bearing Type2 Ball
  • RPM>7000 RPM
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V 18 W input powers high-airflow server cooling
  • Dual-ball bearing sustains speeds above 7000 RPM
  • 4-pin connector enables precise PWM speed control
  • 60 × 38 mm form factor fits HP DL180 G6 and P4300 G2
  • Non-LED black design keeps rack aesthetics clean

60×38 mm 12 V server fan

The Zyvpee PSD1206PMBX-A is a 60 mm by 38 mm case fan built for server cooling. It runs on 12 V power and draws 18 W through a 4-pin connector. Dual ball bearings support speeds above 7000 RPM for continuous airflow in rack environments.

Suits HP DL180 G6 and P4300 G2 bays

This unit matches part numbers 519199-001 and 530748-001, so it fits directly into those chassis. Builders who need a different mounting pattern, a lower noise profile or LED lighting should look elsewhere.

>7000 RPM dual-ball bearing spec

The listed speed of more than 7000 RPM combined with 2-ball bearing construction is the single figure that determines whether this fan meets the thermal demands of the target server platforms.

Puncte forte

  • 12 V 18 W input powers high-airflow server cooling
  • Dual-ball bearing sustains speeds above 7000 RPM
  • 4-pin connector enables precise PWM speed control
  • 60 × 38 mm form factor fits HP DL180 G6 and P4300 G2
  • Non-LED black design keeps rack aesthetics clean

Specificații

BrandZyvpee
SeriesPSD1206PMBX-A
ModelPSD1206PMBX-A
TypeCase Fan
Bearing Type2 Ball
RPM>7000 RPM
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesServer Cooling
Dimensions60*38MM

Întrebări despre acest articol

How do I install this 60x38mm 4-pin fan in an HP DL180G6 server and what step is often missed?

Align the four mounting holes, connect the 4-pin PWM header so the motherboard can control speed, and verify the connector keying matches the 12V 18W pinout; the step often missed is seating the connector fully so the tachometer signal works.

What maintenance will this dual-ball-bearing 7000 RPM fan need over time?

Dual ball bearings are sealed and require no lubrication; plan to clean dust from the blades and frame every 6-12 months and replace the fan if bearing noise appears or RPM drops below spec.

What is the first limit reached when this 12V 18W fan runs continuously at over 7000 RPM?

The 18W power draw and resulting heat in the motor windings become the limiting factor; sustained max speed can raise internal temperature until thermal protection throttles RPM or the bearing life is consumed faster.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.