我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black 60x38mm 12V server case fan with four-pin connector

Zyvpee

Zyvpee PSD1206PMBX-A 60x38mm 12V 18W 4-pin case fan

SKU CH-F1MC-S8VD6

12 V, 18 W server-grade 60 × 38 mm case fan with 2-ball bearing spinning above 7000 RPM on a 4-pin connector

  • TypeCase Fan
  • Bearing Type2 Ball
  • RPM>7000 RPM
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V 18 W input powers high-airflow server cooling
  • Dual-ball bearing sustains speeds above 7000 RPM
  • 4-pin connector enables precise PWM speed control
  • 60 × 38 mm form factor fits HP DL180 G6 and P4300 G2
  • Non-LED black design keeps rack aesthetics clean

60×38 mm 12 V server fan

The Zyvpee PSD1206PMBX-A is a 60 mm by 38 mm case fan built for server cooling. It runs on 12 V power and draws 18 W through a 4-pin connector. Dual ball bearings support speeds above 7000 RPM for continuous airflow in rack environments.

Suits HP DL180 G6 and P4300 G2 bays

This unit matches part numbers 519199-001 and 530748-001, so it fits directly into those chassis. Builders who need a different mounting pattern, a lower noise profile or LED lighting should look elsewhere.

>7000 RPM dual-ball bearing spec

The listed speed of more than 7000 RPM combined with 2-ball bearing construction is the single figure that determines whether this fan meets the thermal demands of the target server platforms.

商品特色

  • 12 V 18 W input powers high-airflow server cooling
  • Dual-ball bearing sustains speeds above 7000 RPM
  • 4-pin connector enables precise PWM speed control
  • 60 × 38 mm form factor fits HP DL180 G6 and P4300 G2
  • Non-LED black design keeps rack aesthetics clean

商品規格

BrandZyvpee
SeriesPSD1206PMBX-A
ModelPSD1206PMBX-A
TypeCase Fan
Bearing Type2 Ball
RPM>7000 RPM
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesServer Cooling
Dimensions60*38MM

商品問答

How do I install this 60x38mm 4-pin fan in an HP DL180G6 server and what step is often missed?

Align the four mounting holes, connect the 4-pin PWM header so the motherboard can control speed, and verify the connector keying matches the 12V 18W pinout; the step often missed is seating the connector fully so the tachometer signal works.

What maintenance will this dual-ball-bearing 7000 RPM fan need over time?

Dual ball bearings are sealed and require no lubrication; plan to clean dust from the blades and frame every 6-12 months and replace the fan if bearing noise appears or RPM drops below spec.

What is the first limit reached when this 12V 18W fan runs continuously at over 7000 RPM?

The 18W power draw and resulting heat in the motor windings become the limiting factor; sustained max speed can raise internal temperature until thermal protection throttles RPM or the bearing life is consumed faster.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。