Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Aqua duplex fibre patch cord with paired LC connectors and LSZH jacket

10Gtek

10Gtek LC-LC OM3 Duplex 50/125 LSZH 3-Meter (9.8ft) Fibre Optic Cable

SKU CH-B6CG-8WX6D

A 3-metre OM3 duplex patch cable with LC connectors, LSZH jacket and bend-insensitive 50/125 fibre tested to 0.3 dB insertion loss for 10 GbE and Fibre Channel links

  • TypeFiber
  • Color1 Pack
  • Length9.84 ft.
  • Connector Number2

Option 1 Pack

Length 9.8 ft.

  • OM3 rating supports 10 GbE and Fibre Channel up to 1200-MX
  • Bend-insensitive design allows 7.5 mm radius for tight installations
  • Zirconia ceramic ferrules with PC polish deliver 0.3 dB insertion loss
  • LSZH jacket meets IEC 60793-2-10 and TIA/EIA 568-C.3 standards
  • 14-year ISO certified manufacturer tests 100 % for insertion and return loss

3-Metre OM3 LC Duplex Patch Cord

This 10Gtek fibre patch cord uses OM3-rated 50/125 µm multimode fibre with LC connectors on both ends. It is built for 10 Gigabit Ethernet, Fibre Channel and legacy Fast Ethernet links in data-centre or campus networks. The LSZH jacket meets fire-safety requirements for indoor routing.

LSZH Jacket and Bend-Insensitive Core

The low-smoke zero-halogen jacket reduces toxic emissions in a fire. Bend-insensitive multimode fibre allows a 7.5 mm bend radius, four times tighter than standard 50 µm cable, easing installation in dense patch panels or cable trays. Factory insertion-loss testing records 0.3 dB typical and return loss of 35 dB.

Zirconia Ceramic Ferrules and Standards Compliance

Zirconia ceramic ferrules with PC polish maintain low-loss mating across repeated connections. The assembly complies with TIA/EIA 568-C.3, IEC 60793-2-10 A1b, CE and RoHS. Aramid yarn inside the 2.0 mm outer diameter cable adds tensile strength for long runs with multiple bends.

Prednosti

  • OM3 rating supports 10 GbE and Fibre Channel up to 1200-MX
  • Bend-insensitive design allows 7.5 mm radius for tight installations
  • Zirconia ceramic ferrules with PC polish deliver 0.3 dB insertion loss
  • LSZH jacket meets IEC 60793-2-10 and TIA/EIA 568-C.3 standards
  • 14-year ISO certified manufacturer tests 100 % for insertion and return loss

Špecifikácie

Brand10Gtek
TypeFiber
Color1 Pack
Length9.84 ft.
Connector Number2

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How do I install the LC-LC OM3 duplex cable and what step do people often get wrong?

Align the keyed LC connectors with the SFP transceiver ports and push until the latch clicks; the common mistake is forcing the connector without matching the key orientation, which can damage the ceramic ferrule.

What maintenance or replacement will this cable need later?

Inspect the LC end faces periodically with a fibre microscope and clean with a lint-free wipe and isopropyl alcohol; replace the patch cord if insertion loss rises above the tested 0.3 dB or if the LSZH jacket shows cracking.

What limit appears first under sustained use?

The 0.3 dB insertion-loss budget is the first margin to erode; contamination or micro-bends beyond the 7.5 mm radius can push loss above spec before the 35 dB return-loss figure is affected.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.