Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa

A-Tech

A-Tech 16GB DDR3 1866 ECC RDIMM 2Rx4 for Kingston D2G72L131 KFJ-PM318/16G KTA-MP318/16G Server RAM

SKU CH-29XM-7VV94

16 GB DDR3 1866 MHz ECC registered DIMM for Kingston D2G72L131, KFJ-PM318/16G and KTA-MP318/16G with CL13 latency and 1.5 V operation

  • Capacity16GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR3 1866 MHz registered ECC RDIMM for server reliability
  • CL13 latency at 1.5 V standard voltage for stable operation
  • 2Rx4 dual-rank organisation with major-brand chips for data integrity
  • 240-pin DIMM form factor matches Kingston D2G72L131, KTA-MP318/16G, KFJ-PM318/16G
  • Rigorously tested modules deliver dependable performance in server and workstation systems

16GB DDR3 1866 ECC RDIMM for Kingston Servers

This 16GB DDR3 1866MHz ECC Registered DIMM is built for server and workstation systems requiring error-correcting memory. It uses a 2Rx4 organisation and major-brand chips on a 240-pin module. The module runs at the standard DDR3 voltage of 1.5V with a CAS latency of CL13.

Verify DDR3 Registered DIMM support

Before ordering, confirm your system accepts DDR3 Registered ECC DIMMs and operates at 1.5V. Unbuffered or non-ECC slots will not work with this registered module. Check the motherboard manual for maximum capacity per slot and supported memory speeds to ensure compatibility.

Direct replacement for Kingston D2G72L131

The module is a compatible equivalent for Kingston part numbers D2G72L131, KTA-MP318/16G and KFJ-PM318/16G. It provides a tested 16GB upgrade path without requiring firmware changes or additional configuration beyond standard BIOS memory detection.

Prednosti

  • 16 GB DDR3 1866 MHz registered ECC RDIMM for server reliability
  • CL13 latency at 1.5 V standard voltage for stable operation
  • 2Rx4 dual-rank organisation with major-brand chips for data integrity
  • 240-pin DIMM form factor matches Kingston D2G72L131, KTA-MP318/16G, KFJ-PM318/16G
  • Rigorously tested modules deliver dependable performance in server and workstation systems

Špecifikácie

BrandA-Tech
Capacity16GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

What comes in the box with this 16GB DDR3 1866 ECC RDIMM and what else do I need?

The box contains one 16GB 240-pin DDR3 1866 ECC Registered DIMM module. No additional parts are required for installation if your server has an available DDR3 RDIMM slot.

How do I choose between the Kingston part numbers D2G72L131 KTA-MP318/16G and KFJ-PM318/16G?

All three Kingston part numbers refer to the same 16GB DDR3 1866 ECC RDIMM 2Rx4 specification. This single A-Tech module replaces any of them.

What does the PC3-14900 rating mean for real-world server performance?

PC3-14900 is the industry designation for DDR3 1866 speed. The module runs at 1866 MT/s with CL13 latency and 1.50V, delivering the rated bandwidth for compatible server platforms.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.