Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green printed circuit board with black memory chips and gold contacts

A-Tech

A-Tech 16GB DDR3L 1333 ECC RDIMM 2Rx4 1.35V Server Memory

SKU CH-QGK5-FAH4Z

16 GB DDR3L 1333 ECC registered DIMM with 2Rx4 organisation and 1.35 V operation

  • Capacity16GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR3L capacity handles demanding server workloads
  • ECC registered design detects and corrects memory errors
  • 35 V low-voltage operation reduces power draw
  • 1333 MHz CL9 speed delivers responsive data throughput
  • Compatible replacement for listed Micron part numbers

16GB DDR3L ECC RDIMM for Servers

This 16GB registered DDR3L module runs at 1333 MHz with CL9 latency and operates at 1.35V. It uses a 2Rx4 organisation and a 240-pin DIMM form factor built on Micron chipset. The stick is designed as a compatible replacement for several Micron part numbers including MT36KDZS2G72PZ-1G4D1 and MT36KSF2G72PZ-1G4E1FG.

Who This Suits and Who Should Look Elsewhere

System administrators upgrading or repairing DDR3L-era servers and workstations that require registered ECC memory will find this module a direct match. Buyers whose platforms only accept unbuffered non-ECC UDIMMs or SO-DIMMs cannot use this part.

Deciding Specification — Registered ECC DDR3L

The single factor that determines fit is the registered ECC DDR3L interface at 1.35V; the motherboard must explicitly support RDIMMs with this voltage and pin-out. If the system calls for unbuffered memory or a different voltage, this module will not function.

Prednosti

  • 16 GB DDR3L capacity handles demanding server workloads
  • ECC registered design detects and corrects memory errors
  • 35 V low-voltage operation reduces power draw
  • 1333 MHz CL9 speed delivers responsive data throughput
  • Compatible replacement for listed Micron part numbers

Špecifikácie

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT36KDZS2G72PZ-1G4D1, MT36KSF2G72PZ-1G4D1FE, MT36KSF2G72PZ-1G4D1FF, MT36KSF2G72PZ-1G4E1FE, MT36KSF2G72PZ-1G4E1FG
Capacity16GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
FeaturesMT36KDZS2G72PZ-1G4D1, MT36KSF2G72PZ-1G4D1FE, MT36KSF2G72PZ-1G4D1FF, MT36KSF2G72PZ-1G4E1FE, MT36KSF2G72PZ-1G4E1FG

Otázky k tomuto produktu

Will this 16GB DDR3L 1333 ECC RDIMM run in a server that already has 1.5V DDR3 1333 modules installed?

Yes, DDR3L 1.35V modules are backward compatible with 1.5V DDR3 slots and will operate at 1.5V when mixed with standard DDR3 1333 DIMMs.

How can I confirm the 2Rx4 registered ECC module is recognised correctly after installation?

Check the BIOS memory information screen; it should show 16GB, DDR3 1333MHz, ECC registered, dual-rank (2Rx4) and CAS latency CL9.

Does the package include only the single 240-pin DIMM or are any brackets or cables supplied?

Only the 16GB 240-pin DDR3L ECC RDIMM is included; no brackets, cables or additional hardware are provided.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.