Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green 240-pin DDR3L registered ECC DIMM with black chips

A-Tech

A-Tech 16GB DDR3L 1866MHz ECC RDIMM 2Rx4 1.35V Server Memory

SKU CH-D09X-58CED

16GB DDR3L 1866MHz ECC RDIMM 2Rx4 1.35V server memory module for Hynix-compatible systems

  • Capacity16GB
  • SpeedDDR3L 1866 (PC3L 14900)
  • CAS LatencyCL13
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB capacity handles heavy server workloads
  • DDR3L 1866 MHz speed accelerates data throughput
  • ECC registered design corrects errors for reliability
  • 35 V low voltage reduces power consumption
  • 2Rx4 dual-rank organisation maximises memory density

A-Tech 16GB DDR3L ECC RDIMM for Servers

This 16GB registered DIMM runs at DDR3L 1866MHz with a CL13 latency and 1.35V operation. It is built as a direct replacement for Hynix HMT42GR7AFRAC-RD, HMT42GR7BFR4A-RD and HMT42GR7DFR41-RD modules. The 2Rx4 organisation and ECC support target server and workstation platforms that require registered memory.

Installing the 240-pin DIMM into a compatible slot

Align the notch on the module with the key in the DDR3 slot and press firmly until the retention clips lock. Registered DIMMs must be supported by the motherboard chipset; unbuffered consumer boards will not recognise the module. The 1.35V low-voltage spec also requires a platform that can supply DDR3L levels.

Check your system manual for DDR3L registered

Verify that the server or workstation accepts 16GB 2Rx4 registered modules at 1866MHz and 1.35V before ordering. Some platforms limit maximum capacity per slot or require specific population rules for multi-rank DIMMs. This module is not compatible with systems that only support unbuffered non-ECC memory.

Prednosti

  • 16 GB capacity handles heavy server workloads
  • DDR3L 1866 MHz speed accelerates data throughput
  • ECC registered design corrects errors for reliability
  • 35 V low voltage reduces power consumption
  • 2Rx4 dual-rank organisation maximises memory density

Špecifikácie

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMT42GR7AFRAC-RD, HMT42GR7BFR4A-RD, HMT42GR7DFR41-RD
Capacity16GB
SpeedDDR3L 1866 (PC3L 14900)
CAS LatencyCL13
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesHMT42GR7AFRAC-RD, HMT42GR7BFR4A-RD, HMT42GR7DFR41-RD

Otázky k tomuto produktu

How do I confirm the module runs at 1866 MHz CL13 after installation?

Enter the system BIOS or UEFI and check the memory information screen; it should report DDR3L-1866 with CAS latency 13 and 1.35 V operation.

What comes in the box and do I need anything else?

One 16 GB DDR3L 240-pin ECC RDIMM is included; no extra cables or brackets are required, just an available registered DIMM slot.

Which Hynix part number does this 16 GB DDR3L 1866 MHz module replace?

It is a compatible replacement for Hynix HMT42GR7AFRAC-RD, HMT42GR7BFR4A-RD, and HMT42GR7DFR41-RD.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.