Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa

A-Tech

A-Tech 16GB DDR4 2133 ECC RDIMM 2Rx4 for Micron MTA36ASF2G72PZ-2G1A2IG server RAM

SKU CH-C1XB-97CVR

16 GB DDR4 2133 ECC RDIMM 2Rx4 module, 1.2 V CL15, compatible with Micron MTA36ASF2G72PZ-2G1A2IG series

  • Capacity16GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR4 2133 operation
  • 16 GB capacity lifts server workloads using Micron chipset 2Rx4 modules
  • CL15 latency at 1.20 V delivers stable DDR4 PC4-17000 throughput
  • 288-pin RDIMM form factor fits compatible Micron MTA36ASF2G72PZ series slots
  • Lifetime warranty backs A-Tech quality testing for dependable server memory upgrades

16GB DDR4 2133 ECC RDIMM for Micron servers

This A-Tech module is a 16GB DDR4 2133 ECC registered DIMM built as a compatible replacement for specific Micron part numbers. It targets administrators upgrading or repairing enterprise servers and workstations that require registered memory with error correction. The module operates at the standard 1.20V DDR4 voltage. Quality assurance testing is performed on each unit.

Suits DDR4 RDIMM slots needing 2Rx4 CL15.

This memory suits systems that accept DDR4 2133 registered DIMMs with a 2Rx4 organisation and CL15 latency. It will not work in platforms that require unbuffered UDIMMs, non-ECC modules, or a different rank configuration such as 1Rx8. Builders needing higher frequencies, lower latencies, or consumer form factors should look at other product lines.

288-pin DDR4 DIMM interface decides fit

The module uses a 288-pin DDR4 DIMM interface, which is the single specification that determines whether it physically and electrically fits the target server. Verify that the system board lists DDR4 2133 RDIMM support before purchase.

Prednosti

  • ECC protection guards data integrity with registered DDR4 2133 operation
  • 16 GB capacity lifts server workloads using Micron chipset 2Rx4 modules
  • CL15 latency at 1.20 V delivers stable DDR4 PC4-17000 throughput
  • 288-pin RDIMM form factor fits compatible Micron MTA36ASF2G72PZ series slots
  • Lifetime warranty backs A-Tech quality testing for dependable server memory upgrades

Špecifikácie

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA36ASF2G72PZ-2G1A2IG, MTA36ASF2G72PZ-2G1A2II, MTA36ASF2G72PZ-2G1A2IK, MTA36ASF2G72PZ-2G1A2KG, MTA36ASF2G72PZ-2G1A2KK
Capacity16GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
FeaturesMTA36ASF2G72PZ-2G1A2IG, MTA36ASF2G72PZ-2G1A2II, MTA36ASF2G72PZ-2G1A2IK, MTA36ASF2G72PZ-2G1A2KG, MTA36ASF2G72PZ-2G1A2KK

Otázky k tomuto produktu

How much heat and power does the 1.20V DDR4 2133 module add when the server runs all day?

At 1.20 volts the DDR4 2133 RDIMM draws minimal power and runs cool, so fan noise stays low even during continuous server workloads.

What must the system already provide for this 288-pin ECC RDIMM to work?

The motherboard needs a DDR4 DIMM slot that accepts registered ECC memory and a BIOS that supports 2Rx4 modules at 2133 MHz.

Will this 16GB CL15 registered stick run alongside older DDR4 2133 modules already in the server?

Yes, it will run at the lowest common speed and latency; match voltage at 1.20V and registered ECC type for stable mixed operation.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.