Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 16GB DDR4 2666 CL19 1.2V 288-pin desktop RAM

SKU CH-BPCN-9Q442

A 16 GB DDR4 desktop module running at 2666 MHz with CL19 latency and 1.2 V on a 288-pin DIMM

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • Tested Frequency2666
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCNo
  • 16 GB capacity expands multitasking headroom for demanding workloads
  • DDR4 2666 MHz speed accelerates data transfer rates
  • CL19 latency timing supports responsive system operation
  • 2 V standard voltage reduces power consumption
  • 288-pin DIMM form factor fits compatible desktop motherboards

A-Tech 16GB DDR4 2666 CL19 Desktop Memory

This 16GB DDR4 module runs at 2666MHz with a CAS latency of CL19 and operates at the standard 1.20V. It is an unbuffered, non-ECC DIMM designed for desktop systems that support DDR4 memory. The 288-pin form factor fits standard desktop slots. It targets users needing a straightforward capacity increase for everyday multitasking and general workloads.

Replaces Kingston KCP426ND8/16

This module serves as a direct replacement for Kingston part numbers KCP426ND8/16, ACR26D4U9D8MH-16, KTP9W1-MIE, and KVR26N19D8/16. The jump is worth it when your system currently runs less than 16GB or uses slower DDR4 speeds, and the motherboard supports 2666MHz operation. Matching the existing voltage and latency helps maintain stability without manual tuning.

Straightforward 288-Pin DIMM Installation

Installation follows the standard desktop DIMM procedure: align the notch, press firmly until the retention clips click, and verify detection in the BIOS. Common issues arise when the motherboard does not support 2666MHz natively and defaults to a lower speed, or when mixing modules with different timings prevents dual-channel operation. Verifying the supported memory specifications of your system before purchase avoids these problems.

Prednosti

  • 16 GB capacity expands multitasking headroom for demanding workloads
  • DDR4 2666 MHz speed accelerates data transfer rates
  • CL19 latency timing supports responsive system operation
  • 2 V standard voltage reduces power consumption
  • 288-pin DIMM form factor fits compatible desktop motherboards

Špecifikácie

BrandA-Tech
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
Tested Frequency2666
CAS LatencyCL19
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Otázky k tomuto produktu

Will this 288-pin DDR4 DIMM fit my desktop motherboard?

This module uses the standard 288-pin DDR4 DIMM form factor at 1.20V. It fits any desktop board with a DDR4 slot that accepts 2666MHz non-ECC unbuffered memory.

What is the common mistake when installing this 16GB DDR4 2666 module?

The notch on the 288-pin edge connector must align with the slot key; forcing it backwards bends the gold contacts. Press straight down until both side clips click audibly.

Does this CL19 1.2V DDR4 module need any firmware updates or battery changes over time?

No firmware or battery is involved. The JEDEC-standard 1.2V DDR4 ICs are solid-state; only occasional dust removal from the slot and contacts is needed for long-term reliability.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.