Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green printed circuit board DDR5 desktop memory module, 288 pins, no heat spreader

A-Tech

A-Tech 16GB DDR5 5600 Desktop RAM 1Rx8 CL40 1.1V

SKU CH-YRC4-MMXWY

A 16 GB DDR5 desktop memory module running at 5600 MHz with CL40 latency and 1.1 V operation

  • Capacity16GB
  • SpeedDDR5 5600 (PC5 44800)
  • Tested Frequency5600
  • CAS Latency40
  • Voltage1.10V
  • ECCNo
  • 16 GB capacity lets you run more apps simultaneously
  • DDR5 5600 speed moves data faster than slower modules
  • CL40 latency keeps response times tight
  • 1 V operation matches the DDR5 standard for efficiency
  • 288-pin DIMM fits standard desktop motherboard slots

16GB DDR5-5600 desktop module

This 16GB DDR5-5600 desktop module delivers a tested frequency of 5600MHz at PC5-44800 bandwidth. It uses a single-rank 1Rx8 layout with a CAS latency of 40 and runs at the standard 1.1V. The unbuffered, non-ECC DIMM fits 288-pin slots and serves as a compatible replacement for TeamGroup TED516G5600C46BK.

Thermals, noise and power draw

Operating at 1.10V keeps power draw low and heat output minimal during normal desktop workloads. The module has no heat spreader and no moving parts, so it adds no audible noise to the system. Standard DDR5 voltage ensures compatibility with typical platform power budgets without extra cooling requirements.

CAS latency 40 at DDR5-5600

The decisive specification is the CL40 timing at the rated 5600MHz speed, which determines how quickly the memory responds to CPU requests. Verify that your motherboard supports DDR5-5600 at this latency before purchasing. Matching this timing avoids down-clocking and ensures the module runs at its tested performance level.

Prednosti

  • 16 GB capacity lets you run more apps simultaneously
  • DDR5 5600 speed moves data faster than slower modules
  • CL40 latency keeps response times tight
  • 1 V operation matches the DDR5 standard for efficiency
  • 288-pin DIMM fits standard desktop motherboard slots

Špecifikácie

BrandA-Tech
SeriesCompatible Replacement for TeamGroup TED516G5600C46BK
ModelA-Tech 16GB DDR5-5600 Desktop RAM Module
Capacity16GB
SpeedDDR5 5600 (PC5 44800)
Tested Frequency5600
CAS Latency40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand DRAM IC Chips
ColorGreen/Black
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseCompatible Replacement for TeamGroup TED516G5600C46BK

Otázky k tomuto produktu

How do I install the 288-pin DDR5 module and which orientation mistake should I avoid?

Align the notch on the module with the key in the motherboard slot, press straight down until both retention clips click, and do not force it backwards — the key position prevents reverse insertion.

What maintenance or replacement will this 16GB 1Rx8 stick need later?

No scheduled maintenance is required; keep the gold contacts clean and ensure the motherboard firmware stays current, and replace the module only if memory diagnostics report errors.

At what point does the CL40 1.1V timing become the limiting factor under sustained load?

The CAS latency of 40 cycles at 5600 MT/s sets the baseline response time; under continuous heavy workloads the memory controller will hit this latency floor before bandwidth saturates.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.