NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
A-Tech
32 GB DDR4 2666 ECC registered DIMM with Samsung-compatible 2Rx4 chips for server workloads
This 32GB DDR4 2666 ECC RDIMM module is built for servers and workstations that require registered memory with error correction. It operates at 1.20V with a CAS latency of 19 and uses a 2Rx4 rank configuration on a 288-pin DIMM. The module serves as a direct replacement for Samsung part numbers M393A4K40BB2-CTD, M393A4K40CB2-CTD, and M393A4K40DB2-CTD.
This module fits systems that specifically support DDR4 ECC registered DIMMs at the 2666 speed grade. It will not work in desktop or laptop platforms that accept only unbuffered non-ECC memory, nor in servers requiring load-reduced or unregistered ECC modules. Buyers whose hardware demands a different voltage, pin count, or rank structure must select a different part.
The defining specification is the registered ECC design combined with a 2Rx4 rank layout, which determines compatibility with the memory controller and motherboard slot population rules. Verifying that the target system requires registered ECC RDIMMs and supports this rank configuration is the single step that confirms whether this module is the correct part.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Align the notch on the module with the slot key, press firmly until both side clips click, and ensure the registered buffer is seated before tightening the retention lever.
No scheduled maintenance is required; ECC corrects single-bit errors on the fly, and the module should only be replaced if multi-bit errors appear in system logs.
The CL19 latency at 1.20V sets the throughput ceiling; sustained bandwidth maxes out at the PC4-21300 rating before thermal throttling becomes a factor.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?