NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
A-Tech
32GB DDR5 4800MHz ECC registered DIMM with 2Rx8 organisation and CL40 latency
This 32GB DDR5 4800MHz ECC RDIMM module uses 288-pin registered DIMM technology with a 2Rx8 rank structure. It operates at the standard 1.10V DDR5 voltage and carries a CAS latency of 40. The module is built as a direct replacement for specific Hynix part numbers.
This module suits administrators upgrading or repairing servers that require DDR5 4800MHz registered ECC memory in a 32GB density. It is not for desktop boards that only accept unbuffered non-ECC DIMMs, nor for systems limited to lower DDR5 speeds or different pin counts.
The registered ECC design with 2Rx8 organisation is the single specification that determines compatibility. Only platforms whose memory controllers support registered error-correcting modules at this rank configuration will accept the part.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix HMCG88AEBRA107N HMCG88MEBRA103N HMCG88MEBRX HMCG88MEBRX002 |
| Model | A-Tech 32GB DDR5-4800 ECC RDIMM Server RAM Module |
| Capacity | 32GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
The module operates at 4800 MT/s, delivering PC5-38400 bandwidth when the platform supports DDR5-4800; the memory controller will down-clock if the CPU or chipset specifies a lower maximum.
It fits a standard 288-pin DDR5 DIMM socket; the module has no heat spreader, so it sits at the base JEDEC height and clears most CPU coolers and chassis air baffles.
Power down, open the chassis, align the notch with the key in the 288-pin slot, press firmly until both retention clips click, then consult the system manual for correct channel population and BIOS memory mapping for registered ECC modules.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?