Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two green DDR2 DIMM sticks with black chips, 240-pin gold contacts, 1.8V label

A-Tech

A-Tech 4GB (2x2GB) DDR2 533MHz PC2-4200 UDIMM 1.8V CL4 240-Pin Desktop RAM

SKU CH-26T0-CQ4CM

A 4 GB dual-channel DDR2 kit running at 533 MHz with CL4 latency and 1.8 V operation

  • Capacity4GB (2 x 2GB)
  • SpeedDDR2 533 (PC2 4200)
  • Tested Frequency533
  • Voltage1.80V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 4GB (2 x 2GB)

Speed DDR2 533 (PC2 4200)

  • 4GB dual-channel kit doubles bandwidth for smoother multitasking
  • DDR2 533MHz speed handles everyday desktop workloads efficiently
  • 8V standard voltage ensures broad motherboard compatibility
  • 240-pin UDIMM form factor fits legacy desktop slots
  • Rigorously tested modules deliver dependable system stability

Kit capacity and fit

This kit supplies four gigabytes across two unbuffered DIMMs rated for DDR2 533 operation. It targets desktop owners who need a straightforward capacity increase on platforms that accept 240-pin modules at standard voltage.

Verify platform requirements

Confirm that the motherboard supports DDR2 533 (PC2-4200) memory and provides 240-pin DIMM slots running at 1.8 volts. The modules are non-ECC and unregistered, so the board must accept that configuration for the kit to function.

Suitability summary

The dual-channel pair suits older AMD and Intel desktops specified for DDR2 533 speeds. Systems requiring ECC, registered DIMMs, a different DDR generation, or higher frequencies should select alternative memory.

Prednosti

  • 4GB dual-channel kit doubles bandwidth for smoother multitasking
  • DDR2 533MHz speed handles everyday desktop workloads efficiently
  • 8V standard voltage ensures broad motherboard compatibility
  • 240-pin UDIMM form factor fits legacy desktop slots
  • Rigorously tested modules deliver dependable system stability

Špecifikácie

BrandA-Tech
SeriesA-Tech DDR2 Desktop Memory RAM
Capacity4GB (2 x 2GB)
SpeedDDR2 533 (PC2 4200)
Tested Frequency533
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Recommend UseAMD & Intel Compatible

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will this 240-pin DDR2 kit fit a motherboard that only accepts DDR2 533 MHz UDIMM memory?

Yes, the kit is built to the DDR2 533 (PC2-4200) standard, uses 240-pin UDIMM modules and runs at 1.8 V, matching those motherboard requirements.

Can I install a single 2 GB module from this kit instead of the pair?

Each module is a 2 GB DDR2 533 UDIMM, so one will work alone, but the pair is tested for dual-channel operation and delivers the full 4 GB capacity.

Is this memory compatible with systems that require non-ECC unbuffered DDR2 DIMMs?

The modules are non-ECC and unbuffered, operating at the standard 1.8 V DDR2 voltage, making them suitable for desktop boards that specify that configuration.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.