NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
A-Tech
A 4 GB DDR3 1066 MHz ECC registered DIMM with 4Rx8 organisation and 240 pins for Dell server upgrades
This is a single 4GB DDR3 1066MHz (PC3-8500) registered ECC DIMM built for server and workstation platforms. It runs at 1.5V with CL7 latency and uses a 4Rx8 organisation on a 240-pin form factor. The module carries major-brand chips and is validated as a direct replacement for the listed Dell part numbers. It targets administrators maintaining legacy DDR3 systems that specifically require registered error-correcting memory.
It fits systems that accept DDR3 1066 registered ECC RDIMMs and will not work in boards limited to unbuffered UDIMMs. Buyers whose platforms demand a different DDR3 speed grade, a different rank configuration, or a non-ECC memory type should select a module matching those exact requirements. The 4Rx8 density also means the motherboard must support quad-rank registered DIMMs at this frequency.
The registered buffer and on-board ECC are the decisive attributes; without both, the module will not post in a compatible slot. Verify that your system's memory list calls for DDR3 1066 PC3-8500 ECC RDIMM 4Rx8 before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module uses the standard 240-pin DDR3 DIMM form factor, so it fits any server board that accepts DDR3 registered ECC memory.
Most servers detect the 4Rx8 registered ECC configuration automatically; the common mistake is mixing registered and unbuffered DIMMs in the same channel.
The module is built with major-brand chips and tested for server workloads; under normal operating conditions it typically remains reliable for the life of the platform.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?