Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green 240-pin DDR3 ECC registered DIMM with black memory chips

A-Tech

A-Tech 4GB DDR3 1333MHz ECC RDIMM 2Rx8 Micron MT18JSF51272PDZ-1G4 server RAM

SKU CH-C0XJ-5RQQN

4 GB DDR3 1333 MHz ECC registered server module with 240 pins and 1.5 V operation

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in server workloads
  • Registered design reduces electrical load for stable operation
  • DDR3 1333 MHz speed matches PC3-10600 specification
  • 240-pin DIMM form factor fits standard server slots
  • 50 V standard voltage ensures broad compatibility

4GB DDR3 1333MHz ECC RDIMM Server Module

This A-Tech 4GB DDR3 1333MHz ECC RDIMM module uses Micron chips and a registered 2Rx8 layout to deliver error-correcting memory for servers and workstations. It runs at PC3-10600 speed with CL9 latency at 1.50V. The 240-pin DIMM form factor fits standard DDR3 registered slots.

Suited for registered DDR3 platforms needing ECC

This module suits administrators upgrading or repairing systems that require registered ECC DDR3 memory at 1333MHz. It will not work in platforms that only accept unbuffered non-ECC DIMMs or that require a different DDR generation. Builders needing higher capacity per slot should look at larger modules.

Registered ECC with 2Rx8 organisation

The single specification that decides fit is the registered ECC design with 2Rx8 organisation. Only motherboards wired for registered DDR3 ECC at 1333MHz will accept this part; unbuffered or non-ECC boards will not post with it installed.

Prednosti

  • ECC protection prevents data corruption in server workloads
  • Registered design reduces electrical load for stable operation
  • DDR3 1333 MHz speed matches PC3-10600 specification
  • 240-pin DIMM form factor fits standard server slots
  • 50 V standard voltage ensures broad compatibility

Špecifikácie

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

Does the 2Rx8 rank layout of this DDR3 module require any specific maintenance or replacement planning?

The 2Rx8 organisation is a physical layout of the memory chips; it does not create a wear item or a scheduled replacement interval.

What limit appears first when this 1.50 V DDR3 1333 MHz RDIMM runs under sustained load?

The registered buffer and ECC logic add a small latency overhead, so the memory controller’s timing budget is typically the first bottleneck under continuous heavy traffic.

How much heat and power does a single 4 GB DDR3 1333 MHz registered ECC DIMM draw when the server runs all day?

At the standard 1.50 V DDR3 voltage a 4 GB RDIMM typically draws only a few watts, producing modest heat that normal server airflow handles without extra cooling.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.