Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green rectangular DDR3L ECC RDIMM module with 240 pins and black memory chips

A-Tech

A-Tech 4GB DDR3L 1333 ECC RDIMM 1Rx4 Server RAM

SKU CH-RMQ8-927M1

4GB DDR3L 1333 ECC RDIMM replacement for Micron MT18KDF51272PZ-1G4, MT18KSF51272PZ-1G4, MT18KSF51272PZ-1G4M1 PC3L-10600

  • Capacity4GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Registered ECC protects server data integrity
  • DDR3L 1333 MHz CL9 delivers stable throughput
  • 35 V low voltage reduces power draw
  • 240-pin 1Rx4 RDIMM fits compatible slots
  • Major-brand chips tested for reliable operation

Server ECC RDIMM 4GB 1Rx4

This registered ECC module delivers 4GB of DDR3L memory for servers and workstations that require error correction and signal buffering. The single-rank 1Rx4 organisation suits systems that populate multiple slots per channel while maintaining stability. It replaces Micron MT18KDF51272PZ-1G4 and MT18KSF51272PZ-1G4M1 part numbers in qualified platforms. Builders needing non-ECC or unbuffered DIMMs should choose a different module type.

Low-voltage 1.35V DDR3L thermals

Operating at 1.35V instead of the standard 1.5V reduces power draw and heat output in densely populated memory banks. The DDR3L 1333 speed rating (PC3L-10600) keeps signalling within conservative margins, helping fan curves stay quiet under sustained workloads. Registered buffering adds minimal latency while lightening the electrical load on the memory controller. Modules run cooler than standard-voltage DDR3 equivalents in the same chassis.

240-pin DIMM registered build

The 240-pin DDR3 DIMM form factor fits server and workstation boards keyed for registered memory; it will not seat in desktop slots wired for unbuffered DIMMs. Major-brand chips and CL9 timing reflect factory validation for 24/7 operation in multi-socket systems. ECC circuitry corrects single-bit errors before they reach the OS, protecting data integrity in critical services. Verify the platform qualified vendor list before installation to confirm registered DIMM support.

Prednosti

  • Registered ECC protects server data integrity
  • DDR3L 1333 MHz CL9 delivers stable throughput
  • 35 V low voltage reduces power draw
  • 240-pin 1Rx4 RDIMM fits compatible slots
  • Major-brand chips tested for reliable operation

Špecifikácie

BrandA-Tech
Capacity4GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

How do I install this 240-pin DDR3L RDIMM and what step is often missed?

Power off the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both clips lock, then enable ECC in the BIOS — many forget the BIOS step.

What maintenance or replacement will this 4GB 1Rx4 module need later?

No routine maintenance is required; the module either runs indefinitely or is replaced only if a memory test reports correctable ECC errors that exceed your platform threshold.

What limit appears first when this 1.35V CL9 RDIMM runs sustained workloads?

The registered buffer adds one cycle of latency, so the 1333 MT/s CL9 timing ceiling is reached before the 1.35 V thermal envelope becomes a constraint.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.