Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa

A-Tech

A-Tech 4GB DDR3L 1600 SODIMM 204-Pin 1.35V

SKU CH-JS9V-HKRGY

A 4 GB DDR3L laptop module running at 1600 MHz with CL11 timing and 1.35 V low voltage

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo
  • 4GB DDR3L module expands laptop multitasking headroom
  • 1600 MHz speed accelerates application load times
  • 35 V low-voltage design reduces power draw
  • 204-pin SO-DIMM fits standard DDR3 laptop slots
  • CL11 latency supports responsive system operation

4 GB DDR3L 1600 SO-DIMM laptop module

This A-Tech module delivers 4 GB of DDR3L memory at 1600 MHz in a 204-pin SO-DIMM form factor. It runs at 1.35 V with CL11 latency and is unbuffered, non-ECC. The stick is built as a direct replacement for Micron MT8KTF51764HZ-1G6J1 in notebooks and all-in-one PCs.

Fits laptops and AIOs needing one 4 GB DDR3L 1600

Systems that require DDR3L 1600 SO-DIMM memory at 1.35 V will accept this module. Buyers whose platforms need ECC, registered memory, a different voltage, higher speed, or a different pin count cannot use this part.

Voltage fixed at 1.35 V DDR3L

The 1.35 V operating voltage determines whether the module is compatible with the target laptop or all-in-one. Verify the system specifies DDR3L 1.35 V before ordering, as standard 1.5 V DDR3 slots may not support this low-voltage stick.

Prednosti

  • 4GB DDR3L module expands laptop multitasking headroom
  • 1600 MHz speed accelerates application load times
  • 35 V low-voltage design reduces power draw
  • 204-pin SO-DIMM fits standard DDR3 laptop slots
  • CL11 latency supports responsive system operation

Špecifikácie

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT8KTF51764HZ-1G6J1
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesMT8KTF51764HZ-1G6J1
Recommend UseCompatible Replacement for Micron MT8KTF51764HZ-1G6J1

Otázky k tomuto produktu

Will the 1.35V DDR3L SODIMM need any firmware updates or contact cleaning after installation?

No firmware updates or periodic contact cleaning are required; the module is tested and ready to run at 1.35V once seated in the 204-pin slot.

What limit appears first when the CL11 1600MHz module runs continuously at full load?

The CAS latency of 11 cycles at 1600MHz sets the timing ceiling before thermal throttling becomes a factor on this unbuffered, non-ECC stick.

How much heat and power does the 4GB stick draw during all-day operation without a heat spreader?

At 1.35V the module draws minimal power and runs cool enough for passive laptop airflow; no spreader is fitted or needed.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.