BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277478BTC
Skladom
A-Tech
A-Tech 4GB DDR3L 1600 SODIMM laptop RAM Samsung M471B5173BH0-YK0 CB0 DB0 EB0 QH0 PC3L-12800 1Rx8
4GB DDR3L 1600 SODIMM laptop memory module with CL11 latency and 1.35V low voltage
- Capacity4GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCNo
- 4GB capacity adds multitasking headroom for everyday workloads
- DDR3L 1600 speed accelerates data transfer for responsive performance
- 35V low-voltage operation reduces power draw and heat in laptops
- 204-pin SODIMM form factor fits standard DDR3 laptop memory slots
- CL11 latency delivers quick access times for smooth system operation
4 GB DDR3L SODIMM for laptop upgrades
This A-Tech module supplies four gigabytes of DDR3L memory at 1600 MHz with CL11 latency. It uses the 204-pin SO-DIMM form factor and runs at 1.35 volts. The stick is unbuffered, non-ECC and built as a direct replacement for several Samsung part numbers. It targets owners of compatible notebooks or all-in-one systems who need a straightforward capacity increase.
Suits DDR3L 1.35 V platforms needing a single 4 GB
The module fits laptops that accept DDR3L SO-DIMMs at 1600 MHz and 1.35 V. It will not work in systems that require 1.5 V DDR3, registered or ECC memory, or modules larger than four gigabytes per slot. Buyers whose machines need higher density per slot, a different voltage or a faster data rate should look at other options.
1.35 V low-voltage DDR3L specification
The defining specification is the 1.35 V operating voltage that marks this memory as DDR3L rather than standard DDR3. A system designed for 1.5 V DDR3 may not recognise or stabilise with this module. Confirm that the laptop explicitly supports DDR3L 1.35 V before ordering.
Prednosti
- 4GB capacity adds multitasking headroom for everyday workloads
- DDR3L 1600 speed accelerates data transfer for responsive performance
- 35V low-voltage operation reduces power draw and heat in laptops
- 204-pin SODIMM form factor fits standard DDR3 laptop memory slots
- CL11 latency delivers quick access times for smooth system operation
Špecifikácie
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Otázky k tomuto produktu
Which capacity should I pick for a single-slot upgrade?
This module provides 4GB in one 204-pin DDR3L SODIMM, so a single stick fills one slot and adds 4GB total.
What does the 1600 MHz rating mean once installed?
The module runs at DDR3L 1600 (PC3L-12800) with CL11 latency at 1.35V, delivering that speed if the laptop’s memory controller supports it.
Is the PC3L-12800 label a DDR3 or DDR3L standard, and what does it cap?
PC3L-12800 denotes DDR3L 1600; the low-voltage 1.35V spec caps power draw while keeping the 1600 MT/s data rate.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
