NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
A-Tech
4GB DDR4 3200MHz CL22 288-pin unbuffered DIMM module for desktop upgrades
This 4GB DDR4 module runs at 3200MHz with CL22 latency and 1.2V operation. It is built as a non-ECC unbuffered DIMM for desktop systems and uses major-brand chips. The stick is listed as a compatible equivalent for Dell part numbers AB371020 and SNP36FTXC/4G.
The memory uses a standard 288-pin DIMM form factor that fits regular desktop slots. All modules undergo quality-assurance testing before shipping to ensure dependable performance. Verification of your system's supported memory specifications is recommended prior to installation.
Operating at the standard DDR4 voltage of 1.20V keeps power draw low during normal workloads. The unbuffered design adds no active components that would increase heat output. With no onboard ECC or registered circuitry the module runs quietly within typical desktop thermal limits.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Yes — the module is listed as a compatible equivalent for Dell part numbers AB371020 and SNP36FTXC/4G, and it uses the standard 288-pin DDR4 DIMM form factor.
It will work if your motherboard supports mixed capacities; both modules will run at 3200 MHz with CL22 timings at 1.20 V, but for dual-channel performance a matched pair is recommended.
No — it operates at the standard DDR4 voltage of 1.20 V and uses the JEDEC-standard CL22 timing, so it should run automatically without manual configuration.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?