Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Four green DDR4 RDIMM sticks with black heat spreaders and gold contacts

A-Tech

A-Tech 512GB (4x128GB) DDR4 2933 ECC RDIMM 2S2Rx4 server RAM

SKU CH-1NJN-5GK88

A 512 GB quad-channel DDR4-2933 ECC registered DIMM kit with four 128 GB modules at CL21 and 1.2 V

  • Capacity512GB (4 x 128GB)
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 512GB (4 x 128GB)

  • 512 GB total capacity from four 128 GB modules
  • ECC registered DIMMs protect data integrity in servers
  • DDR4 2933 MHz speed supports high-throughput workloads
  • 288-pin quad-rank 3DS TSV design maximises density
  • 2 V standard voltage keeps power draw low

Server DDR4 ECC RDIMM kit

This A-Tech kit delivers 512 GB of DDR4 2933 memory across four 128 GB modules. It is built for servers and workstations that require registered ECC DIMMs. The kit uses quad-rank 3DS chips on a 288-pin form factor. It runs at standard 1.2 V DDR4 voltage.

Quad-rank 3DS registered specification

Each module is a 2S2Rx4 (4Rx4) 3DS/TSV registered DIMM with CL21 latency at PC4-23400 speed. The quad-rank design demands a platform that supports 3DS memory topology. Systems limited to dual-rank or single-rank modules will not recognise the full capacity. Compatibility must be confirmed against the motherboard qualified-vendor list before purchase.

Suited for high-density server builds

This kit fits administrators expanding memory in DDR4 servers that accept quad-rank 3DS RDIMMs. It is not for desktop or laptop computers, which lack registered ECC support. It is also unsuitable for workstations restricted to dual-rank modules or lower maximum DIMM capacities. Buyers needing non-ECC or unbuffered memory should look elsewhere.

Prednosti

  • 512 GB total capacity from four 128 GB modules
  • ECC registered DIMMs protect data integrity in servers
  • DDR4 2933 MHz speed supports high-throughput workloads
  • 288-pin quad-rank 3DS TSV design maximises density
  • 2 V standard voltage keeps power draw low

Špecifikácie

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 128GB 2S2Rx4 PC4-2933Y-R
Capacity512GB (4 x 128GB)
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2S2Rx4 (4Rx4 3DS/TSV)
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What does the 512 GB quad-channel kit deliver in a real server?

The kit provides four 128 GB DDR4 2933 registered DIMMs, giving a total of 512 GB of ECC memory that runs at 1.20 V with CL21 latency for data-integrity workloads.

What does the PC4-23400 DDR4 2933 interface cap in practice?

The modules operate at DDR4 2933 MT/s (PC4-23400) with ECC and registered buffering, so the memory controller can sustain that transfer rate across each populated channel.

What does the 288-pin 2S2Rx4 3DS form factor need to fit?

Each module is a 288-pin DDR4 RDIMM using 3DS/TSV quad-rank x4 chips; it requires a server or workstation board with registered DDR4 DIMM slots that support 2S2Rx4 (4Rx4) 3DS modules.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.