Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Eight green DDR4 ECC UDIMM sticks, no heat spreaders, 288-pin gold contacts

A-Tech

A-Tech 64GB (8x8GB) DDR4 2133 ECC UDIMM 2Rx8 CL15 1.2V Server RAM

SKU CH-P0TD-6DWMF

Eight unbuffered ECC DDR4 modules totalling 64 GB at 2133 MHz CL15 for server and workstation upgrades

  • Capacity64GB (8 x 8GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • 64 GB total capacity for demanding server workloads
  • ECC unbuffered design detects and corrects memory errors
  • DDR4 2133 MHz speed with CL15 latency
  • 20 V standard voltage reduces power draw
  • 8 modules × 8 GB dual-rank x8 configuration

Server ECC kit for multi-channel workloads

This 64GB kit contains eight 8GB DDR4 modules built for servers and workstations that require error-correcting unbuffered memory. Each module runs at 2133 MHz with CL15 latency and 1.20V operation. The dual-rank x8 organisation helps populate all channels on supported platforms.

Passive cooling and standard voltage

The modules have no heat spreader and operate at the DDR4 standard 1.20V, so thermal output stays low inside populated server chassis. Power draw scales with the number of populated slots rather than clock speed. Acoustic impact is negligible because no active cooling is required.

288-pin UDIMM layout and rank density

Each stick uses the 288-pin unbuffered DIMM form factor with a 2Rx8 configuration, which affects how many modules a memory controller can address per channel. Builders must verify that their system accepts ECC UDIMM modules and supports the total rank count across all populated slots. Desktop and laptop boards are not compatible.

Prednosti

  • 64 GB total capacity for demanding server workloads
  • ECC unbuffered design detects and corrects memory errors
  • DDR4 2133 MHz speed with CL15 latency
  • 20 V standard voltage reduces power draw
  • 8 modules × 8 GB dual-rank x8 configuration

Špecifikácie

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 8GB 2Rx8 PC4-2133P-E
Part NumberAT8G8D4D2133UD8N12V
Capacity64GB (8 x 8GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips / Error Correcting Technology for Server & Workstation Systems

Otázky k tomuto produktu

How do I install the 288-pin DDR4 UDIMM modules and which step is often missed?

Align each 288-pin module with the motherboard slot, press down until the retention clips click on both sides, and confirm the system detects all 64 GB in the BIOS — the step often missed is seating every module fully before locking the clips.

What maintenance or replacement will the 1.20 V ECC UDIMM kit need over time?

No scheduled maintenance is required; the modules have no heat spreader or moving parts, so only a failed stick would need replacement, which is covered by the lifetime warranty.

What limit appears first when the dual-rank 2133 MHz kit runs under sustained load?

The CL15 latency at 2133 MHz sets the throughput ceiling, so sustained workloads will hit the memory bandwidth limit before voltage or temperature becomes a factor.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.