NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
A-Tech
A 64GB DDR4 2933 ECC LRDIMM module with 4Rx4 organisation, CL21 latency and 1.20V operation for server memory upgrades
This 64 GB DDR4 2933 ECC LRDIMM module uses Load Reduced technology with a 4Rx4 organisation to deliver high-capacity memory for server and workstation platforms. It operates at the standard 1.20 V DDR4 voltage and carries a CL21 latency rating. The 288-pin DIMM form factor fits compatible DDR4 slots in enterprise systems.
The Load Reduced buffer reduces electrical loading on the memory bus, allowing the module to maintain signal integrity when all ranks are active during prolonged workloads. ECC circuitry detects and corrects single-bit errors throughout continuous operation. The 4Rx4 rank structure distributes access across four ranks, supporting steady throughput in multi-threaded server applications.
The DDR4 2933 (PC4-23400) interface caps peak bandwidth at the rated data rate, so sustained throughput cannot exceed this ceiling regardless of rank count. The 288-pin DIMM slot provides the physical and electrical connection defined by the DDR4 standard. System memory controllers must support ECC LRDIMM operation at 2933 MT/s to utilise the full specification.
| Brand | A-Tech |
|---|---|
| Capacity | 64GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module operates at standard DDR4 1.20V with Load Reduced buffering, which lowers electrical load on the memory bus and helps keep thermals manageable during continuous server workloads.
A DDR4 DIMM slot with 288 pins and a server or workstation platform that supports ECC Load Reduced DIMMs and 4Rx4 organisation is required for the module to function.
Mixing 4Rx4 Load Reduced DIMMs with different rank or buffer types on the same channel is not supported by DDR4 server memory architecture; populate identical modules per channel for stable operation.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?