Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Four green DDR3 DIMM modules with gold contacts, no heat spreaders

A-Tech

A-Tech 64GB Kit (4 x 16GB) DDR3 1600MHz RDIMM ECC Registered Memory Upgrade for HP Z420 Z620 Z820

SKU CH-GAQ0-JFYE1

A 64 GB DDR3 1600 MHz ECC registered kit of four 16 GB modules for HP Z420, Z620 and Z820 workstations

  • Capacity64GB (4 x 16GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes

Capacity 64GB (4 x 16GB)

  • 64 GB capacity across four 16 GB modules handles heavy workloads
  • DDR3 1600 MHz PC3-12800 speed accelerates data throughput
  • ECC registered RDIMM design detects and corrects memory errors
  • 2Rx4 dual-rank organisation maximises density per DIMM slot
  • Validated for HP Z420, Z620 and Z820 workstations

HP Z420 Z620 Z820 memory kit

This A-Tech kit supplies 64GB of DDR3 1600MHz registered ECC memory across four 16GB modules. It is built for second-generation HP Z workstations and uses a 240-pin DIMM form factor with 1.5V operation. The CL11 2Rx4 design targets reliable server-grade performance.

Workstation owners needing registered ECC

The kit suits owners of HP Z420 Z620 Z820 workstations that require registered ECC RDIMM modules. It is not for systems that only accept unbuffered ECC UDIMM memory or for platforms with a different DIMM pin count. Mixing with unbuffered modules is not supported.

Registered ECC RDIMM requirement

The single specification that decides fit is the registered ECC RDIMM design with 2Rx4 organisation. The motherboard must support registered error-correcting DDR3 DIMMs at 1600MHz. Unbuffered or non-ECC memory will not work in its place.

Prednosti

  • 64 GB capacity across four 16 GB modules handles heavy workloads
  • DDR3 1600 MHz PC3-12800 speed accelerates data throughput
  • ECC registered RDIMM design detects and corrects memory errors
  • 2Rx4 dual-rank organisation maximises density per DIMM slot
  • Validated for HP Z420, Z620 and Z820 workstations

Špecifikácie

BrandA-Tech
Series2nd Gen. HP Z Workstation Compatible
Model64GB (4x16GB) 2Rx4 PC3-12800 RDIMM for HP Z Workstation Z420, Z620, Z820
Part NumberNE-MS-0097
Capacity64GB (4 x 16GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHP Z Workstation Z420, Z620, Z820
OptionCompatible with HP Z Workstation Z420, Z620, Z820
FeaturesDesigned for HP Z Workstation Z420, Z620, Z820
Package ContentFour Modules

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Do I need an HP Z420, Z620 or Z820 workstation for these modules to function?

Yes, this 64GB kit is designed for second-generation HP Z workstations — the Z420, Z620 and Z820 — and requires one of those systems to operate.

Can I keep my existing ECC UDIMM modules and add these RDIMM modules together?

No, ECC Registered RDIMM modules cannot be mixed with ECC Unbuffered UDIMM modules; the system will not recognise the mixed configuration.

How can I confirm the kit is running at DDR3 1600MHz after installation?

Enter the BIOS or use a system-information utility and verify the memory speed shows 1600MHz (PC3-12800) with CL11 timings at 1.5V.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.