Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa

A-Tech

A-Tech 8GB 1Rx4 PC4-19200 DDR4 2400 ECC REG RDIMM 288-Pin Server RAM

SKU CH-5WW2-B2JKH

Registered ECC DDR4 server module running at 2400 MT/s with 1.2 V operation

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory for heavier workloads
  • DDR4 2400 speed accelerates data transfer rates
  • ECC registered design detects and corrects memory errors
  • Single rank x4 organisation optimises signal integrity
  • 2V operation reduces power draw per module

8GB DDR4 2400 ECC Registered Module

This 8 GB DDR4 2400 registered DIMM adds error-correcting memory to compatible servers and workstations. It uses a 288-pin form factor and operates at the standard 1.2 V DDR4 voltage. The module is built with major-brand chips and carries a single-rank x4 organisation. It is not suitable for desktop or laptop platforms that require unbuffered memory.

Sustained-load behaviour with ECC registered design

The registered buffer reduces electrical load on the memory controller, helping stability when all slots are populated under continuous workloads. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long compute runs. Rated at PC4-19200 bandwidth, the module delivers consistent throughput for virtualisation, database and rendering tasks that keep memory saturated for hours.

Installation notes for registered DIMM slots

Align the notch on the 288-pin edge connector with the key in the server DIMM slot and press firmly until both retention clips lock. Registered modules must be installed in slots designated for RDIMMs; mixing with unbuffered UDIMMs will prevent the system from posting. Consult the platform manual for population order and maximum supported capacity per channel before adding this module.

Prednosti

  • 8GB capacity expands server memory for heavier workloads
  • DDR4 2400 speed accelerates data transfer rates
  • ECC registered design detects and corrects memory errors
  • Single rank x4 organisation optimises signal integrity
  • 2V operation reduces power draw per module

Špecifikácie

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 8GB 1Rx4 PC4-2400T-R
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How much power does this 1.20 V DDR4 RDIMM draw when the server runs continuously?

The module operates at the standard DDR4 voltage of 1.20 V, so power draw stays at the JEDEC baseline for 2400 MHz registered DIMMs; actual system-level consumption depends on your platform's memory controller and load.

What must my motherboard provide for this 288-pin registered ECC module to function?

A DDR4 server or workstation board with RDIMM slots, registered ECC support, and a qualified memory controller; desktop or laptop platforms will not accept this module.

Can I add this PC4-19200 stick alongside slower DDR4 RDIMMs already installed?

Yes — the module will down-clock to match the slowest installed DDR4 RDIMM speed while maintaining ECC and registered operation across all populated channels.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.