Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green 240-pin DDR3 ECC registered DIMM with black chips

A-Tech

A-Tech 8GB DDR3 1333 ECC RDIMM 2Rx8 1.5V Server RAM

SKU CH-0EH0-1T7JT

An 8 GB DDR3 registered ECC module running at 1333 MHz with CL9 latency and 1.5 V for server workloads

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity handles larger server workloads
  • DDR3 1333MHz speed matches PC3-10600 spec
  • ECC registered design corrects data errors automatically
  • 2Rx8 dual-rank organisation for dense memory configs
  • 5V standard voltage fits DDR3 server slots

8GB DDR3 ECC RDIMM

This 8GB registered DIMM uses DDR3 1333 memory with ECC error correction for server and workstation systems. It runs at the standard 1.5V voltage and presents a 2Rx8 rank configuration on a 240-pin interface. The module is built with major brand chips and tested for reliable operation in compatible platforms.

Replaces Kingston KVR13E9/8HM

The stick is a direct equivalent for the Kingston KVR13E9/8HM part number, matching its DDR3 1333 speed, ECC RDIMM type and 1.5V rating. The upgrade is worth it when a system requires registered memory with error correction and the board has free 240-pin slots that support DDR3 1333 PC3-10600 modules.

Fits DDR3 registered DIMM slots

Installation requires a motherboard that accepts DDR3 ECC RDIMM modules at 1333 MT/s and supplies 1.5V to the 240-pin sockets. The single 8GB module leaves additional slots open for further capacity expansion while the registered buffer reduces electrical load on the memory controller.

Prednosti

  • 8GB capacity handles larger server workloads
  • DDR3 1333MHz speed matches PC3-10600 spec
  • ECC registered design corrects data errors automatically
  • 2Rx8 dual-rank organisation for dense memory configs
  • 5V standard voltage fits DDR3 server slots

Špecifikácie

BrandA-Tech
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

Will this 240-pin DDR3 DIMM fit my server's registered memory slots?

Yes, the module is a 240-pin DDR3 RDIMM designed for server and workstation systems that accept registered ECC memory.

What is the correct way to seat this registered ECC module so the system recognises the full 8 GB?

Align the notch with the slot key, press firmly until both side clips click, and verify in BIOS that the memory runs at 1333 MHz with ECC active.

When should I plan to replace this 1.5 V DDR3 RDIMM in a 24/7 server?

DDR3 registered ECC modules typically run for many years; replace if memory diagnostics report correctable errors increasing over time or after a major platform upgrade.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.