Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green 8GB DDR3 DIMM module with black chips no heat spreader

A-Tech

A-Tech 8GB DDR3 1333MHz PC3-10600 CL9 1.5V Desktop RAM

SKU CH-T8NA-V7JRG

An 8 GB DDR3 desktop module running at 1333 MHz with CL9 latency and 1.5 V standard voltage

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • 8GB capacity adds headroom for multitasking
  • 1333MHz DDR3 speed matches PC3-10600 rating
  • CL9 latency at 1.50V standard voltage
  • 240-pin DIMM fits desktop memory slots
  • Tested compatible replacement for Corsair CMX8GX3M1A1333C9

8GB DDR3 1333MHz Desktop Memory

This A-Tech module delivers 8GB of DDR3 memory at 1333MHz for desktop systems. It matches the PC3-10600 standard with CL9 latency and 1.5V operation. The unbuffered, non-ECC DIMM is built as a direct replacement for Corsair CMX8GX3M1A1333C9 and CMX16GX3M2A1333C9 kits.

Installing this 240-pin DIMM

Installation follows the standard desktop DIMM procedure: power down, open the case, align the notch, and press until the retention clips engage. The module uses standard 1.5V DDR3 voltage, so no BIOS voltage adjustment is required. Common issues arise when the motherboard does not support 8GB density per slot or expects a different CAS latency; verify the board's maximum module size and supported speeds before fitting.

PC3-10600 CL9 1.5V specification

The decisive specification is the PC3-10600 rating at CL9 with 1.5V operation. This defines the speed grade, timing, and voltage the memory controller must support. If the system requires a different voltage, a lower latency, or a higher or lower data rate, this module will not be compatible. Always cross-reference the motherboard's qualified vendor list or manual against these exact parameters.

Prednosti

  • 8GB capacity adds headroom for multitasking
  • 1333MHz DDR3 speed matches PC3-10600 rating
  • CL9 latency at 1.50V standard voltage
  • 240-pin DIMM fits desktop memory slots
  • Tested compatible replacement for Corsair CMX8GX3M1A1333C9

Špecifikácie

BrandA-Tech
SeriesCompatible Replacement for Corsair
ModelCMX8GX3M1A1333C9, CMX16GX3M2A1333C9
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesCMX8GX3M1A1333C9, CMX16GX3M2A1333C9
Recommend UseCompatible Replacement for Corsair CMX8GX3M1A1333C9, CMX16GX3M2A1333C9

Otázky k tomuto produktu

How do I confirm the module runs at 1333 MHz with CL9 after installation?

Check the memory tab in CPU-Z or the BIOS memory information screen; it should report DDR3-1333 (PC3-10600) at 1.5 V with CAS latency 9.

What ships in the box and do I need extra parts?

One 8 GB DDR3 240-pin DIMM is included; no heat spreader, cables or additional modules are supplied.

Should I choose the 8 GB single stick or a 16 GB kit for my desktop?

The listing is a single 8 GB module; buy two if your board supports dual-channel and you want 16 GB total.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.