Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green 240-pin DDR3 DIMM with black chips and silver label

A-Tech

A-Tech 8GB DDR3 1600 ECC RDIMM 1Rx4 Server Memory

SKU CH-NRVJ-5RCYH

8GB DDR3 1600 ECC registered DIMM with 1Rx4 organisation for server upgrades

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption with registered DDR3 design
  • 1600 MHz DDR3 speed delivers responsive server performance
  • 1Rx4 organisation maximises 8 GB capacity per module
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits standard server slots

8GB DDR3 1600 ECC RDIMM Server Memory

This 8GB DDR3 1600 ECC RDIMM module is built for servers and workstations that require registered, error-correcting memory. It runs at PC3-12800 speed with CL11 latency and standard 1.50V operation. The single-rank 1Rx4 organisation uses major-brand chips on a 240-pin DIMM. It serves as a direct replacement for several Hynix part numbers.

Suits systems needing registered ECC DDR3 at 1600

This module fits platforms that support DDR3 RDIMM memory at 1600 MHz with 1.50V voltage and ECC functionality. It is not suitable for desktop boards that accept only unbuffered non-ECC DIMMs. Buyers whose systems require higher densities per slot or a different DDR generation should verify compatibility before ordering.

Registered ECC with 1Rx4 rank determines fit

The registered ECC design combined with a single-rank 1Rx4 layout is the specification that decides whether this DIMM will work in a given server or workstation. Confirm that your platform supports registered error-correcting DDR3 modules with this rank configuration before purchase.

Prednosti

  • ECC protection prevents data corruption with registered DDR3 design
  • 1600 MHz DDR3 speed delivers responsive server performance
  • 1Rx4 organisation maximises 8 GB capacity per module
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits standard server slots

Špecifikácie

BrandA-Tech
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

Will my motherboard need DDR3 1600 MHz registered DIMM slots to use this 8GB module?

Yes, this module requires a DDR3 1600 MHz registered DIMM slot; it will not work in standard unbuffered desktop slots.

Can I mix this 1Rx4 registered ECC stick with older unbuffered non-ECC DDR3 modules I already have?

No, registered ECC modules cannot be mixed with unbuffered non-ECC memory; the system will not boot or will disable ECC.

How do I confirm the module is running at DDR3 1600 with ECC active after installation?

Check BIOS or UEFI memory information; it should show 1600 MHz speed, registered type, and ECC enabled for this 8GB DIMM.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.