Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green 240-pin DDR3 DIMM with black chips, silver contacts, ECC unbuffered label

A-Tech

A-Tech 8GB DDR3 1600 ECC UDIMM 2Rx8 CL11 1.5V Server RAM

SKU CH-PPMH-Y9FWG

ECC unbuffered DDR3 module adds 8 GB of error-correcting server memory at 1600 MHz with CL11 latency

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection prevents data corruption with built-in error correction
  • 1600 MHz DDR3 speed handles demanding server workloads
  • 2Rx8 dual-rank organisation increases memory density per slot
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin UDIMM form factor fits compatible server motherboards

8 GB DDR3 1600 ECC UDIMM Server Module

This 8 GB DDR3 1600 MHz module is built for servers and workstations that require ECC unbuffered memory. It operates at the standard 1.5 V with CL11 latency and a 2Rx8 rank configuration on a 240-pin DIMM.

Suits systems needing ECC UDIMM DDR3 1600 at 1.5 V

Buyers whose platforms demand registered DIMMs, a different voltage, or a higher speed grade should look elsewhere. This module will not work in boards that only accept buffered or non-ECC memory.

ECC unbuffered DDR3 1600 at 1.5 V decides fit

The single specification that determines compatibility is the ECC UDIMM type at DDR3 1600 with 1.5 V operation. Verify your system supports this exact combination before ordering.

Prednosti

  • ECC protection prevents data corruption with built-in error correction
  • 1600 MHz DDR3 speed handles demanding server workloads
  • 2Rx8 dual-rank organisation increases memory density per slot
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin UDIMM form factor fits compatible server motherboards

Špecifikácie

BrandA-Tech
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

What motherboard slot does this 240-pin DDR3 module require?

This module fits a standard DDR3 DIMM slot with 240 pins on the motherboard.

Can I mix this ECC UDIMM with non-ECC DDR3 memory already in my system?

Mixing ECC and non-ECC DDR3 modules is not recommended because the memory controller will disable error correction for all installed memory.

How can I confirm the module is running at DDR3 1600 with CL11 after installation?

Check the BIOS memory information or a system utility such as CPU-Z to verify the reported speed of 1600 MHz and CAS latency of 11.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.