NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
A-Tech
16 GB DDR4 2666 ECC registered server memory with Samsung chips, CL19 latency and 1.2 V operation
This 16 GB registered ECC module is built for Supermicro servers and workstations that require validated memory. It runs at DDR4 2666 with a CAS latency of 19 at the standard 1.20 V. The Samsung 1Rx4 chipset and 288-pin RDIMM form factor ensure signal integrity in multi-DIMM configurations.
Replacing non-ECC or single-rank unregistered sticks adds error correction and registered buffering, which become essential once a platform populates four or more slots per channel. The jump is worth it when workloads demand data integrity and the motherboard Qualified Vendor List includes the MEM-DR416L-SL04-ER26 part number.
One module delivers 16 GB at PC4-21300 bandwidth, leaving additional DIMM slots free for future expansion up to the platform limit. It comfortably handles virtualization hosts, database buffers, and compile farms that fit within the installed capacity. Systems needing more than the available slot count can support will require higher-density modules.
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR416L-SL04-ER26 |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Samsung Chipset |
| Features | Supermicro Certified MEM-DR416L-SL04-ER26 (M393A2K40CB2-CTD) |
Yes, it uses the 288-pin RDIMM form factor and requires a DDR4 2666 MHz registered ECC slot on a compatible server or workstation motherboard.
Align the notch with the key, press firmly until both retention clips click, and verify the BIOS detects the full 16 GB at 2666 MHz — installers often forget to enable ECC in the firmware.
Replace it if memory diagnostics report uncorrectable ECC errors, the system fails to POST with the module installed, or a firmware update lists the M393A2K40CB2-CTD as incompatible.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?