Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green 240-pin DDR3 RDIMM module with black memory chips and a white label sticker

A-Tech

A-Tech Supermicro Certified 4GB DDR3 1333MHz ECC Registered RDIMM 240-Pin

SKU CH-8GQE-80GZP

4GB DDR3 1333MHz ECC registered RDIMM for Supermicro servers, dual-rank 2Rx4 at 1.5V

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for guaranteed server compatibility
  • 4 GB DDR3 1333 MHz ECC registered RDIMM
  • 2Rx4 dual-rank design with CL9 latency
  • 5 V standard voltage for stable operation
  • 240-pin RDIMM form factor fits server slots

Supermicro Certified DDR3 RDIMM

This 4 GB DDR3 1333 MHz module carries Supermicro certification for MEM-DR340L-HL02-ER13 and uses Hynix HMT151R7BFR4C-H9 chips. It is a 240-pin registered DIMM with ECC, dual-rank 2Rx4 organisation and standard 1.50 V operation. The CL9 latency and PC3-10600 rating match server memory specifications.

Servers needing ECC registered memory

The module suits systems that require registered ECC DDR3 RDIMMs at 1333 MHz with 2Rx4 density. It will not work in platforms that only accept unbuffered UDIMMs, SO-DIMM form factors, or memory speeds and voltages outside the stated DDR3 1333 MHz 1.50 V specification.

Registered ECC with 2Rx4 density

The single specification that decides fit is the registered ECC RDIMM design combined with 2Rx4 dual-rank organisation. Only motherboards and servers qualified for registered DDR3 ECC modules at this rank configuration will recognise and use the 4 GB capacity.

Prednosti

  • Supermicro certified for guaranteed server compatibility
  • 4 GB DDR3 1333 MHz ECC registered RDIMM
  • 2Rx4 dual-rank design with CL9 latency
  • 5 V standard voltage for stable operation
  • 240-pin RDIMM form factor fits server slots

Špecifikácie

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR340L-HL02-ER13
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR340L-HL02-ER13 (HMT151R7BFR4C-H9)

Otázky k tomuto produktu

How does this 4GB DDR3 1333MHz 2Rx4 ECC registered RDIMM behave when installed alongside existing DDR3 1333MHz modules?

It will operate at DDR3 1333MHz with CL9 timing at 1.5V; matching speed, voltage, rank and ECC type avoids down-clocking or instability.

What should I check in the BIOS or OS to confirm the MEM-DR340L-HL02-ER13 is running as intended after installation?

Verify the module reports 4GB capacity, DDR3 1333MHz speed, ECC registered status and 1.5V voltage in BIOS or system information tools.

What is included with the Supermicro certified module and what must be sourced separately?

The box contains one 4GB Hynix HMT151R7BFR4C-H9 240-pin RDIMM; no additional cables, brackets or software are required for installation.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.