Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Rectangular metal mining unit with dual 12038 fans, matte grey finish, PSU included

AFRNDK

AFRNDK Innosilicon A10 Pro 720MH/s 1300W 7GB Ethash ASIC Miner With PSU

SKU CH-GKEE-G7C8B

An Ethash ASIC miner delivering 720 MH/s at 1300 W with 7 GB memory, 1.806 J/MH efficiency and 70 dB noise

  • Delivers 720 MH/s Ethash hashrate with ±5 % tolerance
  • Consumes 1300 W for 1.806 J/MH energy efficiency
  • Operates between 5 °C and 45 °C ambient temperature
  • Cooled by two 12038 fans at 70 dB noise level
  • Compact 362 mm × 136 mm × 285 mm chassis with integrated PSU

Ethash ASIC Miner with PSU

The AFRNDK Innosilicon A10 Pro is a dedicated Ethash ASIC miner supplied with an integrated power supply unit. It targets operators mining Ethereum Classic or other Ethash-based coins who want a single-piece rack-mountable device rather than a multi-GPU rig. The unit delivers a rated hash rate of 720MH/s with a ±5% tolerance.

Hashrate capacity and power headroom

At the nominal 720MH/s the miner draws 1300W, yielding an efficiency of 1.806j/Mh. The hardware can reach a peak of 750MH/s while acoustic output stays at 70dB. Two 12038 fans keep internal temperatures within the 5 to 45°C operating window; sustained loads above the rated envelope will push thermals toward the upper limit.

Voltage and form-factor limits

The power input accepts a narrow 11.60 to 13.00V DC range, so the bundled PSU must match that window exactly. Physical footprint is fixed at 362mm length, 136mm width and 285mm height, dictating rack shelf spacing and airflow clearance. No alternative voltage taps or chassis variants exist for this model.

Prednosti

  • Delivers 720 MH/s Ethash hashrate with ±5 % tolerance
  • Consumes 1300 W for 1.806 J/MH energy efficiency
  • Operates between 5 °C and 45 °C ambient temperature
  • Cooled by two 12038 fans at 70 dB noise level
  • Compact 362 mm × 136 mm × 285 mm chassis with integrated PSU

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

Will the 1300 W draw of this A10 Pro work with the 11.60–13.00 V DC supply I already use for older miners?

Yes — the unit is rated for 11.60 to 13.00 V input, so any existing DC source in that range can power it without modification.

How can I verify the 720 MH/s Ethash hashrate is actually being delivered once the miner is running?

Watch the on-board status page or pool dashboard for a steady rate within the ±5 % tolerance and confirm the two 12038 fans are spinning while exhaust temperature stays between 5 and 45 °C.

Does the box include the PSU and both 12038 cooling fans, or do I need to order them separately?

The PSU is included and the two 12038 fans are factory-fitted; nothing extra is required to start mining.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.