Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Ten red PCIe x16 riser cards with 60 cm USB 3.0 cables and 6-pin power connectors

AFRNDK

AFRNDK VER0010s-PLUS PCI-E 16X riser kit 10pcs 60cm

SKU CH-1HHK-WFEMM MPN VER0010s-PLUS

A ten-piece kit of 60 cm PCI-E 16X risers with 8 solid capacitors, 6-pin power and USB 3.0 cables for multi-GPU mining rigs

  • Stable GPU power delivery backed by eight solid capacitors
  • Independent 12 V DC-DC supply with 6-pin connector reduces motherboard load
  • Reliable contact ensured by original imported PCI-E 16X slot connector
  • Signal integrity up to 3 m using multi-layer shielded USB 3.0 cable
  • Flexible placement with soft, easy-to-route USB cable and secure slot buckle

10-piece PCI-E 16X riser kit

This kit contains ten PCI-E 16X riser cards, ten PCI-E 1X cards, ten power cables and ten USB 3.0 cables. Each riser uses a 60 cm shielded cable with eight solid capacitors and a 6-pin power connector. The design targets multi-GPU mining rigs that need flexible card placement.

6-pin power and shielded 60 cm cable

The 6-pin connector draws 12 V power directly from the PSU through an on-board DC-DC circuit, removing load from the motherboard. Multi-layer shielding allows the 60 cm cable to run without signal loss. A locking buckle on each 16X slot secures the graphics card during transport or vibration.

Suited for high-density mining builds

Builders running ten or more cards on a single board benefit from the independent power delivery and long, flexible routing. Operators who need shorter cables, different power connectors or a smaller quantity should look at alternative riser kits.

Prednosti

  • Stable GPU power delivery backed by eight solid capacitors
  • Independent 12 V DC-DC supply with 6-pin connector reduces motherboard load
  • Reliable contact ensured by original imported PCI-E 16X slot connector
  • Signal integrity up to 3 m using multi-layer shielded USB 3.0 cable
  • Flexible placement with soft, easy-to-route USB cable and secure slot buckle

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

How many risers are included in the kit?

The kit contains ten PCI-E 16X cards, ten PCI-E 1X cards, ten power cords and ten USB 3.0 cables.

What is the length of each USB 3.0 cable?

Each cable is 60 cm long, allowing flexible placement of graphics cards inside the chassis.

Does the riser draw power from the motherboard or from a separate connector?

A 6-pin connector on the adapter card supplies 12 V power directly, so the motherboard is not loaded by the graphics cards.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.