Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black 45-degree revolvable compression fitting for 16/10mm tubing with G1/4 thread

Alphacool

Alphacool 16/10mm 45° Revolvable Compression Fitting G1/4 Black 17084

SKU CH-RNY9-NT1MS

A 45° revolvable compression fitting connects 16/10mm tubing to a G1/4 thread for flexible liquid-cooling routing

  • TypeFittings

Color Black

  • High flow from true 10 mm inner diameter
  • 45° revolvable angle simplifies tight tubing routes
  • G1/4 thread fits standard water-cooling components
  • Compression design seals 16/10 mm tube securely
  • Deep Black chromatised finish resists peeling

16/10 mm 45° Revolvable Compression Fitting

This G1/4 compression fitting connects 16/10 mm tubing at a fixed 45-degree angle. The revolvable body lets you orient the barb after the thread is seated. It is built for custom liquid-cooling loops that demand precise hose routing in tight spaces. The deep black finish resists peeling through a chromatised surface process.

Fits G1/4 ports and 16/10 mm tubing

Thread the fitting into any component with a G1/4 port such as radiators, blocks or reservoirs. The 45° offset clears nearby hardware while the swivel action aligns the tubing run without stress on the barb. High-flow internal diameter maintains coolant velocity through the bend. No additional adapters are required for standard hard or soft tube of matching size.

Single fitting with chromatised finish

The box contains one 45° revolvable compression fitting in deep black. The chromatised coating bonds colour to the brass body for lasting appearance without flaking. Alphacool branding appears in blue lettering on the fitting body. Matching series fittings in chrome or shiny copper are available separately for coordinated loop aesthetics.

Prednosti

  • High flow from true 10 mm inner diameter
  • 45° revolvable angle simplifies tight tubing routes
  • G1/4 thread fits standard water-cooling components
  • Compression design seals 16/10 mm tube securely
  • Deep Black chromatised finish resists peeling

Špecifikácie

TypeFittings

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What is the maximum inner diameter for high-flow tubing this fitting accepts?

The fitting accepts 16/10mm tubing, giving a 10mm inner diameter for high flow.

Does the 45° revolvable design reduce stress on tubing during long-term operation?

The 45° angle and revolvable joint allow flexible hose routing, which reduces mechanical stress on tubing during continuous use.

Which thread standard must my water-block or radiator port use to match this fitting?

The fitting uses a standard G1/4 connection thread for the component side.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.