Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Single deep black knurled compression fitting for 13mm hard tube with G1/4 thread

Alphacool

Alphacool G1/4 13mm HardTube Compression Fitting Deep Black 17189

SKU CH-XVCX-KJK8W

Connects 13mm hard tubes to G1/4 threads with a knurled compression design in deep black

  • TypeFittings

Color Black

  • Secure leak-free loop with precision G1/4 compression seal
  • Fits 13mm hard metal or plexi tubes for rigid builds
  • Knurled grip enables tool-free tightening by hand
  • Deep black finish matches stealth colour schemes
  • Standard G1/4 thread connects to any compatible block or radiator

G1/4 13 mm Hard-Tube Fitting

This compression fitting connects 13 mm outer-diameter rigid tubing to any component with a standard G1/4 thread. The knurled body allows hand tightening without tools. It suits custom loops built with hard acrylic, PETG or metal tubes. Buyers needing push-in quick-disconnects or barb fittings for soft tubing cannot use this part.

Sustained Loop Integrity

The compression design clamps the tube wall evenly around its full circumference, maintaining seal pressure through thermal expansion cycles. Deep black finish resists coolant staining during long-term operation. No flow-restriction data is supplied, so system builders must verify loop pressure drop independently.

Installation Notes

Slide the compression nut and olive onto the tube, seat the tube fully against the internal stop, then tighten the nut until the olive compresses. Over-tightening can crack acrylic or PETG; under-tightening leaves a leak path. No tube-cutting guide or deburring tool is included.

Prednosti

  • Secure leak-free loop with precision G1/4 compression seal
  • Fits 13mm hard metal or plexi tubes for rigid builds
  • Knurled grip enables tool-free tightening by hand
  • Deep black finish matches stealth colour schemes
  • Standard G1/4 thread connects to any compatible block or radiator

Špecifikácie

TypeFittings

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Does the G1/4 thread on the 17189 fitting leak after the loop runs hot all day?

The compression design seals hard 13 mm tubes to a standard G1/4 port and is built for continuous operation without weeping.

What tube size and block ports must I already have to use the 17189 fitting?

You need 13 mm OD rigid tubing and components with G1/4 threads such as radiators, blocks or reservoirs.

Will the 17189 fitting thread into the G1/4 ports on my older CPU block and radiator?

Yes — the G1/4 thread is the long-standing standard, so it mates with legacy blocks and radiators that use the same pitch.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.