Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Chrome 90-degree revolvable barbed fitting with G1/4 thread for 10mm tubing

Alphacool

Alphacool G1/4 3/8" 10mm 90° Revolvable Barbed Fitting Chrome 17135

SKU CH-1S3D-DNEGT

Chrome 90° revolvable barbed fitting with G1/4 thread for 10 mm tubing, designed for high-flow liquid cooling loops

  • TypeFittings

Color/Size 10mm Chrome

  • High flow thanks to true 10 mm inner diameter
  • 90° revolvable design simplifies tight loop routing
  • Chrome finish bonded to brass for lasting colour
  • G1/4 thread fits standard water-cooling components
  • Includes O-ring for reliable leak-free seal

Alphacool G1/4 90° Revolvable Barbed Fitting Chrome

This Alphacool fitting connects 10mm (3/8") tubing to a G1/4 port in a custom liquid-cooling loop. The 90° revolvable design lets you orient the barb without stressing the tubing run. A chrome-plated brass body resists peeling and keeps its colour over time. One fitting with an O-ring is supplied in the box.

Suited for builders routing 10mm tubing at right

The G1/4 thread fits standard water-blocks, radiators and reservoirs. The revolvable joint simplifies tight bends in compact builds. The high-flow bore reduces restriction for pump efficiency. Buyers using tubing with a different inner diameter or needing a straight or swivel connection will need a different fitting.

G1/4 thread with 10mm (3/8") 90° barb

The 90° angle fixes the flow direction at a right angle to the port. Revolvable adjustment allows precise alignment before final tightening. The chrome finish is bonded to the brass to prevent flaking. Part number 17135 identifies this specific chrome model.

Prednosti

  • High flow thanks to true 10 mm inner diameter
  • 90° revolvable design simplifies tight loop routing
  • Chrome finish bonded to brass for lasting colour
  • G1/4 thread fits standard water-cooling components
  • Includes O-ring for reliable leak-free seal

Špecifikácie

TypeFittings

Ďalšie verzie tohto modelu

Ďalších 2 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How do I install the G1/4 3/8" 10mm 90° revolvable barbed fitting and which step is often missed?

Screw the G1/4 thread into the component port until the included O-ring seats fully, then push the 10 mm ID tubing over the barbed end and secure it with a clamp; the step often missed is forgetting to tighten the clamp after the tubing is fully seated.

What maintenance or replacement will the 10 mm barbed fitting need later?

Inspect the O-ring and chrome plating periodically; replace the O-ring if it shows cracking or flattening, and replace the fitting if the chrome finish begins to peel or the brass body corrodes.

What limit appears first on the 90° revolvable fitting under sustained high-flow use?

The 90° bend creates the primary flow restriction, so pressure drop across the elbow becomes the limiting factor before the revolvable joint or barbed seal reaches its mechanical limit.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.