Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black mid-tower ATX case with mesh front panel, wood accents and tempered glass side

Antec

Antec P30 AIR Mid-Tower ATX PC Case

SKU CH-AW31-Z8WBT MPN P30 AIR

A mid-tower ATX case with a mesh front panel, wood accents and five pre-installed PWM fans that direct airflow straight to the GPU, supporting a 360 mm top radiator and 405 mm graphics cards

  • TypeATX Mid Tower
  • ColorBlack
  • Case MaterialSteel / Plastic / Wood
  • Motherboard CompatibilityATX / ITX / Micro ATX
  • Side Panel4mm Tempered Glass
  • Dust FiltersBottom / Top

Options P30 AIR

  • Strong airflow from five pre-installed PWM fans
  • Premium wood accents on metal mesh front panel
  • Optimised GPU cooling with reverse shroud fans
  • 360 mm top radiator support for liquid builds
  • Tool-free 4 mm tempered glass side panel

Mid-Tower ATX Case with Wood Accents

The Antec P30 AIR is a mid-tower ATX chassis built from steel, plastic and wood with a metal mesh front panel and chamfered design. It supports ATX, Micro-ATX and ITX motherboards and includes a tool-free 4mm tempered glass side panel. The case targets builders who want distinctive aesthetics alongside high airflow capacity.

Five Pre-Installed PWM Fans for GPU Cooling

The box contains two 140mm PWM fans at the front, two 120mm PWM reverse fans on the PSU shroud and one 120mm PWM fan at the rear. The reverse fans push air directly toward the graphics card while the front mesh and side intake feed the layout. Dust filters on the top and bottom help balance cooling with cleanliness.

Top 360mm Radiator Support and Connectivity

The top panel accepts radiators up to 360mm while the front supports up to 240mm, giving flexibility for liquid cooling. Maximum GPU length is 405mm, CPU cooler height is 175mm and power supply length is 270mm. Front I/O provides a USB Type-C 3.2 Gen 2 port at 10 Gbps, two USB 3.0 ports and a headphone/mic combo jack.

Prednosti

  • Strong airflow from five pre-installed PWM fans
  • Premium wood accents on metal mesh front panel
  • Optimised GPU cooling with reverse shroud fans
  • 360 mm top radiator support for liquid builds
  • Tool-free 4 mm tempered glass side panel

Špecifikácie

BrandAntec
ModelP30 Air
TypeATX Mid Tower
ColorBlack
Case MaterialSteel / Plastic / Wood
Motherboard CompatibilityATX / ITX / Micro ATX
Side Panel4mm Tempered Glass
Dust FiltersBottom / Top
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays1
Expansion Slots7
Fan OptionsIncluded Fan(s): 2 x 140mm PWM ARGB fans at the front + 2 x 120mm PWM Reverse fans on the PSU Shroud+ 1 x 120mm PWM ARGB fan at the rear
Radiator OptionsFront - Up to 120mm / Front - Up to 140mm / Front - Up to 240mm / Rear - Up to 120mm / Top - Up to 120mm / Top - Up to 240mm / Top - Up to 360mm
Max GPU Length405 mm
Max CPU Cooler Height175 mm
Max PSU Length270 mm
Dimensions18.82 x 8.74 x 18.31inch
Weight6.85kg
Prepravná hmotnosť8.24 kg
Rozmery balenia552 × 552 × 292 mm

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How often should the top and bottom dust filters be cleaned to keep airflow through the metal mesh front panel strong?

Remove the magnetic top filter and slide-out bottom filter every few months; rinse with water, dry fully, and refit to stop dust from choking the 140 mm front intakes.

Which component hits its thermal limit first when the system runs flat-out for hours?

The GPU reaches its temperature ceiling first because the 405 mm length restriction packs high-wattage cards close to the PSU shroud, so the reverse 120 mm fans must stay at high PWM duty.

What is the typical noise level and heat output when the case runs all day with all five PWM fans active?

At full PWM the five fans move enough air for a 360 mm top radiator, so expect a noticeable but not intrusive hum and exhaust air warm to the touch.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.