Tripp Lite PDUMNH15 Monitored 1U PDU 120V 15A 8x 5-15R
- Monitored
- 1U
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
ARCTIC
Server CPU cooler for AMD EPYC SP5 sockets with 10 heatpipes and dual 120 mm PWM fans running 300–3300 RPM
The ARCTIC Freezer 4U-SP5 is a dedicated air cooler built for AMD EPYC processors using the LGA6096 socket. Its low-profile design fits inside standard 4U chassis and leaves RAM slots fully accessible. The unit supports dual-CPU motherboards without interference. It targets administrators who need reliable thermal management in dense rack environments.
Two custom 120 mm fans run between 300 and 3300 RPM via a 4-pin PWM connector for precise speed control. Double ball bearings are rated for 24/7 operation. Ten heatpipes transfer heat from the CPU to the aluminium fin stack. The cooler handles sustained server workloads while keeping acoustic output proportional to demand.
Thermal compound is included in the package. Mounting brackets come pre-installed on the heatsink and use the platform's native mounting points. No extra hardware or backplate is required. This reduces installation time during initial build or field replacement. The bundle omits fan splitters or RGB software.
| Brand | Arctic Cooling |
|---|---|
| Model | Freezer 4U-SP5 |
| Part Number | ACFRE00158A |
Use the pre-installed mounting brackets that match the LGA6096 pattern, apply the included thermal paste, then secure the cooler; the step most often missed is confirming the brackets are locked onto the exclusive mounting points before tightening the screws.
The double ball bearing fans are rated for continuous use; no routine lubrication is required, but dust should be cleared from the heatsink fins and fan blades periodically to maintain airflow.
The PWM fans spin between 300 and 3300 RPM; the thermal limit appears first when the 10 heatpipes and dual fans can no longer dissipate the CPU's heat at maximum RPM.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?