Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Oat White mid tower case with solid steel side panel, tempered glass front, two large 160 mm front fans visible

ASUS

ASUS ProArt PA401 Iron Rhythm Edition PC Case, Oat White

SKU CH-1T5J-3AAAP

ATX case with two pre-installed 160 mm front fans, top radiator support to 240 mm, USB 3.2 Gen 2×2 Type-C front I/O and 315 mm GPU clearance

  • Motherboard CompatibilityATX
  • ColorWhite
  • Case MaterialSteel, tempered glass, ABS plastic
  • With Power SupplyNo
  • Front Ports1×USB 3.2 Gen 2×2 Type-C 2 ×USB 3.2 Gen 1 1 ×Headphone/Micro
  • Fits ATX, M-ATX and MINI-ITX boards for flexible builds
  • Two 160 mm fans pre-installed deliver strong airflow out of the box
  • Top mount accepts 240 mm radiator for liquid cooling
  • USB 3.2 Gen 2×2 Type-C on front panel enables fast transfers
  • Removable dust filters on bottom and front simplify maintenance

ProArt PA401 Iron Rhythm Edition Case

The ProArt PA401 Iron Rhythm Edition is a mid-tower chassis finished in Oat White steel, tempered glass and ABS plastic. It accepts ATX, micro-ATX and mini-ITX motherboards and provides two 2.5/3.5 combo bays plus two dedicated 2.5 bays for storage. Front I/O includes one USB 3.2 Gen 2×2 Type-C port, two USB 3.2 Gen 1 ports and a headset jack. The case ships without a power supply.

Thermals and acoustics with pre-installed fans

Two custom 160 mm fans are factory-mounted at the front and a PWM 120 mm fan at the rear, all managed by a pre-installed five-channel hub. The top panel supports radiators up to 240 mm or pairs of 140 mm or 120 mm fans for additional intake or exhaust. Removable dust filters on the bottom and front help keep airflow paths clean during extended workloads.

Bundled fan hub and clearance limits

The included PWM hub connects up to five fans through a single motherboard header, simplifying cable routing and speed control. Maximum CPU cooler height is 160 mm, graphics cards up to 315 mm long are supported and the power supply compartment accommodates units up to 170 mm deep. Builders needing longer GPUs, taller coolers or deeper power supplies should verify fit before purchase.

Prednosti

  • Fits ATX, M-ATX and MINI-ITX boards for flexible builds
  • Two 160 mm fans pre-installed deliver strong airflow out of the box
  • Top mount accepts 240 mm radiator for liquid cooling
  • USB 3.2 Gen 2×2 Type-C on front panel enables fast transfers
  • Removable dust filters on bottom and front simplify maintenance

Špecifikácie

Motherboard CompatibilityATX
ColorWhite
Case MaterialSteel, tempered glass, ABS plastic
With Power SupplyNo
Front Ports1×USB 3.2 Gen 2×2 Type-C
2 ×USB 3.2 Gen 1
1 ×Headphone/Microphone
BrandASUS

Otázky k tomuto produktu

How do I mount the two pre-installed 160 mm front fans and what step is often missed?

The 160 mm fans are already fitted to the front panel; the step people miss is plugging each fan into the pre-installed PWM hub so speed control works.

Which dust filters will I need to clean or replace over time?

Removable filters sit at the bottom and front; pull them out, rinse or vacuum, and refit — no tools required.

What length limit will stop a long graphics card from fitting?

The case accepts cards up to 315 mm; anything longer hits the front fan bracket and cannot be installed.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.