Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Mid-tower case in black steel with a wood front panel, two large front fans visible

ASUS

ASUS ProArt PA401 Wood Edition PC Case

SKU CH-0WW2-7G0QC

Mid-tower case holds ATX, Micro-ATX or Mini-ITX boards, fits GPUs to 315 mm and CPU coolers to 160 mm, and ships with two 160 mm front fans plus a 120 mm rear fan

  • Motherboard CompatibilityATX Micro-ATX Mini-ITX
  • ColorBlack
  • Case MaterialSteel, ABS plastic, wood
  • With Power SupplyNo
  • Front Ports2 × USB 3.2 Gen 1 (Type-A) 1 × USB 3.2 Gen 2x2 (Type-C) 1 ×
  • Fits ATX, Micro-ATX and Mini-ITX builds
  • Two 160 mm PWM fans pre-installed at front
  • USB 3.2 Gen 2x2 Type-C on front panel
  • Steel, ABS and wood construction
  • 34 mm cable routing space behind motherboard tray

Wood-trimmed mid-tower for creators

The ASUS ProArt PA401 Wood Edition is a steel and ABS chassis with genuine wood accents that accepts ATX, Micro-ATX and Mini-ITX motherboards. Two 160 mm PWM fans are pre-installed at the front and a 120 mm PWM fan at the rear, delivering airflow out of the box. The front I/O provides two USB 3.2 Gen 1 Type-A ports, one USB 3.2 Gen 2x2 Type-C port and a combined headphone-microphone jack.

Builders who value quiet airflow and wood aesthetics

This case suits creators who want a distinctive look and room for a 315 mm graphics card plus a 160 mm CPU cooler. Top mounts accept 120, 140 or 240 mm radiators for liquid cooling. Builders needing more than two vertical expansion slots or a power supply longer than 170 mm should consider other options.

Integrated fan hub and flexible drive layouts

An on-board PWM hub controls up to five fans from a single header, simplifying cable routing behind the 34 mm management space. Drive bays can be configured as one 3.5-inch plus three 2.5-inch, three 3.5-inch, two 3.5-inch plus two 2.5-inch or four 2.5-inch drives. Removable dust filters on the front and bottom make maintenance straightforward.

Prednosti

  • Fits ATX, Micro-ATX and Mini-ITX builds
  • Two 160 mm PWM fans pre-installed at front
  • USB 3.2 Gen 2x2 Type-C on front panel
  • Steel, ABS and wood construction
  • 34 mm cable routing space behind motherboard tray

Špecifikácie

Motherboard CompatibilityATX
Micro-ATX
Mini-ITX
ColorBlack
Case MaterialSteel, ABS plastic, wood
With Power SupplyNo
Front Ports2 × USB 3.2 Gen 1 (Type-A)
1 × USB 3.2 Gen 2x2 (Type-C)
1 × Headphone + Microphone

Otázky k tomuto produktu

What power supply length does the PA401 Wood Edition support for it to work?

The case accepts power supplies up to 170 mm long, so any ATX unit within that length will fit.

Will my existing 3.5-inch hard drives fit alongside the pre-installed 160 mm front fans?

Yes, the drive cage offers flexible layouts including three 3.5-inch bays, and the front fans mount ahead of that cage without reducing bay count.

How can I confirm the two 160 mm front fans and the 120 mm rear fan are running after I build in the case?

Connect all three PWM fans to the motherboard or the built-in hub; the expansion hub supports five PWM fans and will report each fan's speed in BIOS or monitoring software.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.