Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Bitspower G1/4 male-to-female 90-degree rotary extender in true brass finish

Bitspower

Bitspower BP-TB90R 90° rotary extender fitting

SKU CH-47AF-B8TAD MPN BP-TB90R

G1/4" male-to-female rotary extender provides a 90-degree turn for custom liquid-cooling loops

  • TypeFittings
  • True Hi-Flow design maximises coolant throughput
  • 90° rotary joint enables flexible tube routing
  • G1/4" male-to-female thread fits standard loops
  • Hidden O-ring design prevents leaks cleanly
  • True Brass construction resists corrosion reliably

90° Rotary G1/4 Extender Fitting

The Bitspower BP-TB90R is a true brass G1/4 male-to-female extender with a 90-degree rotary angle. It connects rigid or flexible tubing runs in custom liquid-cooling loops while allowing the joint to swivel for alignment. The hidden O-ring design seals the thread without exposed rubber. This fitting suits builders who need a compact right-angle connection with full rotation.

Installing the Rotary Fitting

Screw the male G1/4 thread into the component port by hand, then tighten lightly with a wrench on the brass flats. The female end accepts any standard G1/4 barb, compression fitting or plug. The rotary joint spins freely after installation so you can orient the connected run without stressing the port. Over-tightening can damage the hidden O-ring and cause a slow leak.

Compatibility Checks Before Buying

Verify that every component you plan to connect uses a G1/4 BSPP thread; tapered pipe threads will not seal correctly. Confirm there is enough clearance around the port for the 90-degree body and the rotary mechanism to turn without hitting neighbouring fittings or the case wall. Builders using non-standard thread sizes or needing a straight pass-through should choose a different fitting type.

Prednosti

  • True Hi-Flow design maximises coolant throughput
  • 90° rotary joint enables flexible tube routing
  • G1/4" male-to-female thread fits standard loops
  • Hidden O-ring design prevents leaks cleanly
  • True Brass construction resists corrosion reliably

Špecifikácie

TypeFittings

Otázky k tomuto produktu

How do I confirm the Bitspower BP-TB90R is working correctly after installation?

Tighten the G1/4" male thread until the hidden O-ring compresses, then rotate the female end — it should turn smoothly through the full 90° angle without binding or leaking.

What comes in the box with the Bitspower BP-TB90R, and what must I purchase separately?

The box contains the single G1/4" male-to-female 90° rotary extender fitting; you must buy tubing, G1/4" compatible water blocks or radiators, and coolant separately.

Which version of the Bitspower BP-TB90R should I choose for my loop?

Only the True Brass finish is offered for this G1/4" Hi-Flow rotary extender, so select it when you need a 90° swivel connection in a brass-themed build.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.