Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
White plastic handheld fire prevention device with extension cord plug, three poles, 100mA rating

Brook Livin

Brook Livin Wirecare Plus Fire Prevention Device 100mA 120/240V 48000A

SKU CH-DF32-CX2JX

Plug-in fire prevention device monitors outlets in real time and automatically interrupts faults up to 100 mA at 120/240 V with a 48 000 A surge rating

  • TypePower Distribution & Circuit Protection
  • Item Count1 pack
  • Selling UnitBox
  • Commercial/ResidentialCommercial
  • Amps100mA
  • Number of Poles/Wires3
  • Real-time hazard alerts with GFCI testing
  • Automatic fire prevention for enclosed spaces
  • 100mA sensitivity with 48000A surge protection
  • 120/240V operation across residential and commercial sites
  • Handheld plug-in design reaches tight outlet spaces

Fire Prevention Device for Electrical Enclosures

The Brook Livin Wirecare Plus is a plug‑in fire prevention device designed to protect electrical enclosures and home circuits. It targets overloading, short circuits, overheating and electrical surges in residential and commercial settings. The unit suits homeowners and facility managers seeking automatic fire‑risk reduction at individual outlets.

100mA Leakage Protection at 120/240V AC

The device operates at 100mA sensitivity on 120/240V AC supplies with a three‑pole configuration. Its automatic reset function restores power after a fault clears without manual intervention. A maximum surge current rating of 48000A and an interrupt rating of 100KA define the upper limits of fault current the unit can safely interrupt.

Verify Outlet Access and Voltage Compatibility

Confirm that the installation location provides an accessible standard outlet for direct plug‑in use. Ensure the local supply voltage matches the 120/240V AC rating before connecting the device. The handheld form factor reaches tight spaces, but physical clearance around the outlet must allow the plug to seat fully.

Prednosti

  • Real-time hazard alerts with GFCI testing
  • Automatic fire prevention for enclosed spaces
  • 100mA sensitivity with 48000A surge protection
  • 120/240V operation across residential and commercial sites
  • Handheld plug-in design reaches tight outlet spaces

Špecifikácie

BrandBrook Livin
SeriesWirecare Plus
ModelExtension Cord Plug reaches tight spaces
Part NumberFM00012285
TypePower Distribution & Circuit Protection
Item Count1 pack
Selling UnitBox
Commercial/ResidentialCommercial
Amps100mA
Number of Poles/Wires3
Amperage Interrupt Rating100KA
Voltage AC120/240
Reset TypeAutomatic
Maximum Surge Current48000
Horsepower10 @ 240V, 20@ 480V, 30@600V
MaterialPlastic
FeaturesWidely Use

Otázky k tomuto produktu

How do I choose between the 120 V and 240 V ratings on this Wirecare Plus unit?

The device is rated for both 120/240 V AC supplies, so a single model covers either voltage without needing a separate version.

What does the 48000 A surge-current figure mean once the device is installed in a circuit?

It indicates the maximum surge current the unit can withstand — up to 48 000 amperes — before the protection trips.

What interface or connection standard does this fire-prevention device use, and what does it cap in practice?

It plugs directly into a standard outlet using a three-pole plug, providing automatic reset protection on the circuit it occupies.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.