Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Set of 20 stainless steel nozzle cleaning needles in sizes from 0.15 to 1.0mm

Bruislard 5195PWPY1045 3D Printer Nozzle Cleaning Kit 20pcs 0.15-1.0mm Stainless Steel

SKU CH-P1N6-BB9KB

A 20-piece stainless steel needle set clears 3D printer nozzles from 0.15 mm to 1.0 mm with lengths of 50, 75, 80 and 85 mm

  • Type5195PWPY1045
  • 20 stainless-steel needles cover 0.15–1.0 mm diameters for precise nozzle clearing
  • Flexible yet durable steel resists breakage while protecting nozzle bores from scratches
  • Four needle lengths (50, 75, 80, 85 mm) give comfortable reach for any printer layout
  • Compact 15 × 5 × 1.3 cm case keeps all 20 tools organised and portable
  • Light 8.3 g kit adds essential maintenance without cluttering your workspace

20-piece stainless-steel nozzle cleaning kit

This Bruislard 5195PWPY1045 kit contains twenty stainless-steel needles sized from .15 mm to 1.0 mm. The set is intended for 3D printer owners who need to clear blockages and maintain consistent extrusion. Each needle measures 50, 75, 80 or 85 mm in length for comfortable handling. The compact package weighs 8.3 g and measures 15 by 5 by 1.3 cm.

Needle diameter range .15 mm to 1.0 mm

The deciding specification is the spread of needle diameters covering .15, .2, .25, .3, .35, .4, .5, .6, .8 and 1.0 mm. This range matches common nozzle bore sizes so users can select the correct needle without forcing an oversized tool. Stainless-steel construction provides strength and flexibility while preventing nozzle scratches. No other dimensions or compatibility data are supplied.

Suits hobbyists and small-shop operators clearing

The kit suits makers who regularly print with typical nozzle sizes and want a ready assortment of cleaning needles. It does not suit users who need specialised diameters outside the .15 to 1.0 mm range or who require additional tools such as brushes, tweezers or heated cleaning stations. Buyers needing larger quantities or different material grades should look elsewhere.

Prednosti

  • 20 stainless-steel needles cover 0.15–1.0 mm diameters for precise nozzle clearing
  • Flexible yet durable steel resists breakage while protecting nozzle bores from scratches
  • Four needle lengths (50, 75, 80, 85 mm) give comfortable reach for any printer layout
  • Compact 15 × 5 × 1.3 cm case keeps all 20 tools organised and portable
  • Light 8.3 g kit adds essential maintenance without cluttering your workspace

Špecifikácie

BrandBruislard
Model5195PWPY1045
Part Number5195PWPY1045
Type5195PWPY1045

Otázky k tomuto produktu

What nozzle diameters can the 0.15 mm to 1.0 mm needles clear in a real printer?

The kit covers the common range from 0.15 mm up to 1.0 mm, so it handles standard 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm and 0.8 mm nozzles as well as finer and wider sizes.

Does the stainless steel material set any practical limit on the temperatures or filaments I can clean?

Stainless steel withstands normal hot-end temperatures for PLA, ABS, PETG and similar filaments, so the needles can be used while the nozzle is hot without softening or contaminating the bore.

Will the 50 mm, 75 mm, 80 mm and 85 mm needle lengths fit inside my printer’s hot-end assembly?

The shortest needles are 50 mm and the longest 85 mm; most direct-drive and Bowden hot-ends provide enough clearance for these lengths, but check your hot-end’s internal depth before purchasing.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.