NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Brute Networks
A 64GB DDR4-2400 ECC LRDIMM with 4Rx4 rank and CL15 latency for high-capacity server memory expansion
This 64GB DDR4-2400 ECC Load Reduced DIMM targets administrators who need maximum memory density per slot in compatible HP server platforms. The 4Rx4 organisation and 1.20V operation allow high-capacity configurations without exceeding platform power budgets. It suits virtualisation hosts, database nodes and compute clusters where memory capacity is the primary bottleneck.
Replacing lower-capacity RDIMMs or LRDIMMs with these 64GB modules increases the total addressable memory while keeping the same slot count. The jump is worth it when workloads show constant swapping, paging pressure or an inability to host additional virtual machines. The PC4-19200 speed and CL15 latency maintain throughput for memory-bound applications.
Confirm the server motherboard supports 288-Pin DDR4 LRDIMM modules and accepts a 4Rx4 rank configuration at the target capacity per slot. Check the platform's maximum memory per channel and total rank limit per channel before ordering. Ensure the BIOS revision recognises major-brand DRAM chips (Samsung, SK Hynix or Micron) used on this module.
| Brand | HP |
|---|---|
| Capacity | 64GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
Yes, the module uses the 288-pin DDR4 form factor and 1.20V voltage required by standard server memory slots.
Align the notch with the slot key, press firmly until both side latches click; the common error is stopping before the latches engage fully.
Replace if the system logs uncorrectable ECC errors or fails memory diagnostics; otherwise the module is rated for continuous server operation.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?