NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Brute Networks
HPE-compatible 8GB DDR4-2933 registered ECC server memory, part P03048-091, with 1Rx8 organisation and 1.2V operation
This registered ECC module is built for HPE servers that require DDR4-2933 memory with 1Rx8 organisation. It operates at 1.20 V and uses a 288-pin DDR4 SDRAM interface. The part matches HPE part number P03048-091 and is validated for 100 % compatibility with the original platform. System administrators maintaining existing HPE infrastructure will find it a direct replacement.
Each stick uses Samsung, SK Hynix or Micron components identical to those in OEM-branded modules. All orders ship with identically matched modules so mixed ranks or vendors never appear in the same chassis. The third-party supply route keeps factory warranty coverage intact while reducing procurement cost by more than 60 % versus OEM list price. Lifetime warranty backs the hardware for the service life of the server.
The single-rank 8 GB density suits virtualisation hosts, database nodes and general-purpose application servers running moderate memory footprints. Registered buffering and ECC protect data integrity under sustained load. Workloads that demand larger per-slot capacities or higher memory bandwidth will exceed what this module provides. Additional slots or higher-density RDIMMs are required for those scenarios.
| Brand | HPE |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
The module is registered ECC 1Rx8 and validated for HPE compatibility, so it installs without firmware changes and works in any supported DDR4 slot.
It operates at the standard 1.20V DDR4 voltage; the memory controller’s thermal throttling point will be reached before the module exceeds its rated limits.
At 1.20V the 8GB stick draws only a few watts, produces no sound, and adds negligible heat to the server’s existing airflow.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?