Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two green DDR3 DIMM sticks, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1333 ECC Unregistered DIMM memory upgrade

SKU CH-RV18-NE8AD

Two 4 GB DDR3 ECC unregistered DIMMs at 1333 MHz for the HP ProLiant DL120 G7 server

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • ECC protection safeguards server data integrity
  • 1333 MHz DDR3 speed matches ProLiant DL120 G7 specs
  • 8 GB kit (2 × 4 GB) fills half the 16 GB maximum
  • Unregistered 240-pin DIMMs install in all four ECC UDIMM slots
  • CL9 1.5 V timing ensures stable operation

Compatible HP ProLiant DL120 G7 memory kit

This 8 GB kit contains two 4 GB DDR3 ECC unregistered DIMMs rated at 1333 MHz with CL9 timings. It is designed specifically for the HP ProLiant DL120 G7 server platform. The modules operate at 1.5 V and use major-brand DRAM components.

Simple DIMM installation with slot limits

Installation follows standard 240-pin DIMM procedures: power down, open the chassis, align the notch, and press until the latches click. The server provides four DIMM sockets for ECC UDIMMs and supports a maximum of 16 GB using four 4 GB modules. Populating all four slots is required to reach that capacity.

Verify server model and ECC requirement

Confirm the target system is an HP ProLiant DL120 G7 with part numbers 628690-001, 628691-001 or 628692-001. This kit is ECC unregistered only; it will not work in platforms that require registered DIMMs or non-ECC memory. Buyers needing registered modules or capacities above 16 GB should look elsewhere.

Prednosti

  • ECC protection safeguards server data integrity
  • 1333 MHz DDR3 speed matches ProLiant DL120 G7 specs
  • 8 GB kit (2 × 4 GB) fills half the 16 GB maximum
  • Unregistered 240-pin DIMMs install in all four ECC UDIMM slots
  • CL9 1.5 V timing ensures stable operation

Špecifikácie

BrandComputer Memory Solutions
ModelCM5127210600ECCNRH2R8
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredUnregistered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Proliant Dl120 G7
Package Content2 Memory RAM Sticks

Otázky k tomuto produktu

How can I verify the kit is running at DDR3-1333 CL9 1.5V after installing it in my ProLiant DL120 G7?

Enter the BIOS or iLO interface on the DL120 G7 and confirm the memory speed reads 1333 MHz, CAS latency shows 9-9-9 and voltage is set to 1.5 V for the two 4 GB ECC unregistered DIMMs.

What exactly ships in the box and is anything else required to reach the 16 GB maximum?

The package contains two 4 GB 240-pin DDR3 ECC unregistered DIMMs; to reach the 16 GB limit you must purchase two more identical 4 GB modules to fill all four sockets.

Which CMS part number matches the HP part numbers 628690-001, 628691-001 and 628692-001 for the DL120 G7?

The kit carries CMS model CM5127210600ECCNRH2R8 and is validated for HP part numbers 628690-001, 628691-001 and 628692-001 in the ProLiant DL120 G7.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.