Corn Electronics GR701 E-ATX PC case Saber/Fate Purple
- ATX Full Tower
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Corn Electronics
Full-tower E-ATX case with dual 420 mm radiator mounts, four pre-installed 140 mm PWM fans, a metal GPU holder and a 60 W USB Type-C fast-charge port
Options NieR
Preškrtnuté verzie existujú, ale nie sú tu skladom.
The Corn Electronics GR701 NieR is a full-tower ATX case built for E-ATX, ATX, Micro-ATX and Mini-ITX motherboards up to 12 by 10.9 inches. High-quality UV printing on the panels resists colour fading, and the manufacturer offers custom artwork on request. Four pre-installed 140 mm PWM fans and an ARGB fan hub are included, plus a metal GPU holder to support heavy graphics cards.
Dual 420 mm radiator mounts at the front and top give generous liquid-cooling headroom for high-wattage CPUs and GPUs. The interior fits graphics cards up to 460 mm long, CPU coolers up to 190 mm tall and power supplies up to 240 mm deep. Storage options cover five dedicated 2.5-inch bays and two combo 2.5/3.5-inch bays. Cable-routing space behind the motherboard tray measures 34 mm.
Builders moving from mid-tower chassis gain the extra radiator length, the vertical GPU mounting slots and the front-panel USB 4.0 or USB 3.2 Gen 2x2 Type-C port. The 20.8 kg weight and fixed custom panels mean the case suits permanent workstations rather than frequent LAN-party transport or buyers who want a lightweight, unbranded enclosure.
| Model | international version |
|---|---|
| Type | ATX Full Tower |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Yes, the case allows a maximum GPU length of 460 mm and a maximum CPU cooler height of 190 mm, so both components fit within the stated limits.
Connect the fan headers to your motherboard and use BIOS or software to confirm all four 140 mm PWM fans spin; the LED control button on the front I/O cycles ARGB modes to show the hub is active.
The box includes three 140 mm PWM fans at the front, one 140 mm PWM fan at the rear, an ARGB fan hub, and front-panel cables for 4×USB 3.2 Gen1, 1×USB 3.2 Gen2 Type-C, 1×USB 4.0 or 3.2 Gen2×2 Type-C, audio, reset and LED control; you add motherboard, CPU cooler, GPU, PSU, storage and any extra fans or radiators.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?