Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Four black DDR5 memory modules with RGB light bars

Corsair

Corsair CMH192GX5M4B5200C38 192GB (4x48GB) DDR5 5200 CL38 desktop RAM

SKU CH-NSXV-FSF39 MPN CMH192GX5M4B5200C38

A 192 GB quad-channel DDR5 kit running at 5200 MT/s with CL38 timings, 1.25 V operation, Intel XMP 3.0 support and ten-zone RGB lighting

  • Capacity192GB (4 x 48GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 5200 (PC5 41600)
  • CAS LatencyCL38
  • Timing38-38-38-84
  • Voltage1.25V

Capacity 192GB (4 x 48GB)

Speed DDR5 5200 (PC5 41600)

CAS Latency CL38

LED Color RGB

  • Massive 192GB capacity across four 48GB modules
  • DDR5 5200 speed delivers high bandwidth
  • CL38 latency with 38-38-38-84 timings
  • Intel XMP 3.0 profile enables one-click setup
  • Ten-zone RGB lighting per module via iCUE

Vengeance RGB DDR5 5200 Kit

The Corsair Vengeance RGB kit delivers 192GB across four 48GB modules running at DDR5 5200 with CL38 timings and 1.25V operation. It targets workstations and high-end desktops that need maximum capacity for rendering, virtualization or large datasets. Ten-zone RGB lighting on each module is controlled through iCUE software.

Quad Channel 288-Pin Installation

Four 288-pin DIMMs populate a quad-channel motherboard layout, so the board must provide four slots wired for that topology. The kit uses Intel XMP 3.0 profiles to set 5200 MT/s and 38-38-38-84 timings automatically in the BIOS. No extra power cables are required beyond the slot supply.

Low Voltage Thermal Behaviour

At the rated 1.25V the modules run cool under typical workloads, and the integrated light bar does not add measurable heat. Fan noise in the case remains governed by CPU and GPU cooling rather than the memory itself. Power draw stays within standard DDR5 limits for the stated speed and capacity.

Prednosti

  • Massive 192GB capacity across four 48GB modules
  • DDR5 5200 speed delivers high bandwidth
  • CL38 latency with 38-38-38-84 timings
  • Intel XMP 3.0 profile enables one-click setup
  • Ten-zone RGB lighting per module via iCUE

Špecifikácie

BrandCORSAIR
SeriesVengeance RGB
ModelCMH192GX5M4B5200C38
Part NumberCMH192GX5M4B5200C38
Capacity192GB (4 x 48GB)
Type288-Pin PC RAM
SpeedDDR5 5200 (PC5 41600)
CAS LatencyCL38
Timing38-38-38-84
Voltage1.25V
Multi-channel KitQuad Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
ColorBlack
FeaturesWelcome to the Cutting-Edge of Performance: Push the limits of your system like never before with CORSAIR DDR5 memory, unlocking even faster frequencies, greater capacities, and higher CPU processing.
Dynamic Ten-Zone RGB Lighting: Illuminate your system with ten individually addressable, ultra-bright RGB LEDs per module, encased in a panoramic light bar for vivid RGB lighting from any viewing angle.
Create and Customize: Choose from dozens of preset lighting profiles, or create your own in iCUE.
Custom Intel XMP 3.0 Profiles: Customize and save your own XMP profiles via iCUE to tail
Recommend UseIntel 700 Series
LED ColorRGB
Prepravná hmotnosť0.14 kg
Rozmery balenia164 × 133 × 13 mm

Ďalšie verzie tohto modelu

Ďalších 3 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Does this kit work with a 700-series Intel motherboard?

Yes, the kit is recommended for Intel 700 Series motherboards and uses Intel XMP 3.0 profiles for automatic configuration.

Will four 48 GB modules fit a standard ATX board with four DIMM slots?

The kit contains four 48 GB modules for a total of 192 GB and uses the standard 288-pin form factor, so it fills all four slots on a typical quad-channel board.

What voltage and latency do the XMP profiles set?

The XMP 3.0 profile runs at 1.25 V with timings of 38-38-38-84 at 5200 MT/s.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.