Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Three white 120mm case fans with dual RGB light loops and a lighting controller

Corsair

Corsair CO-9050092-WW LL120 RGB 120mm case fan 3 pack white

SKU CH-EQ3Z-F1FZF MPN CO-9050092-WW

Three 120 mm PWM case fans with 16 addressable RGB LEDs each, dual light loops, hydraulic bearings, 63 CFM airflow at 2200 RPM and 36 dBA noise, plus Lighting Node PRO and RGB hub included

  • Fan Counts3 Fans
  • Fan ControllerController
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm

Fan Size 120mm

Model · Option Triple Pack with Lighting Node Pro

  • Dual light loops with 16 addressable RGB LEDs per fan enable vivid customisation
  • White housing reflects light for brighter illumination and a clean aesthetic
  • PWM control from 360 to 2200 RPM balances quiet operation and airflow
  • Hydraulic bearing delivers 63 CFM airflow at 36 dBA noise level
  • Includes Lighting Node PRO and RGB hub for iCUE synchronisation

Three-fan RGB kit with Lighting Node PRO

This pack contains three 120 mm white case fans, each fitted with 16 individually addressable RGB LEDs divided across two separate light loops. A Lighting Node PRO and an RGB LED fan hub are included so the lighting can be managed through Corsair iCUE software. The fans use hydraulic bearings and connect via standard 4-pin PWM headers for speed control between 360 and 2 200 RPM.

Builders who want synchronised white lighting

The white fan housings reflect light for a brighter appearance and match other white Corsair components. This kit suits anyone expanding an existing iCUE lighting setup or starting a new one with the supplied controller. Buyers who need fans without RGB illumination or who prefer a different colour scheme should look elsewhere.

63 CFM airflow at 36 dBA

Each fan delivers 63 CFM of airflow at a maximum noise level of 36 dBA, a balance that works for typical case ventilation. The 25 mm thickness fits standard 120 mm mounting points. If your build demands higher static pressure or lower acoustic output than these figures provide, a different fan specification will be required.

Prednosti

  • Dual light loops with 16 addressable RGB LEDs per fan enable vivid customisation
  • White housing reflects light for brighter illumination and a clean aesthetic
  • PWM control from 360 to 2200 RPM balances quiet operation and airflow
  • Hydraulic bearing delivers 63 CFM airflow at 36 dBA noise level
  • Includes Lighting Node PRO and RGB hub for iCUE synchronisation

Špecifikácie

BrandCorsair
SeriesLL Series LL120 RGB White Triple Pack
ModelCO-9050092-WW
Fan Counts3 Fans
Fan ControllerController
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic
RPM2200 +/- 10% RPM
Air Flow63 CFM
Noise Level36 dBA
Power Connector4 Pin
ColorWhite
LEDRGB
FeaturesDual RGB Lighting Loop: 16 individually addressable RGB LEDs in each fan, split between two separate light loops, allow for nearly endless customization.
Striking White Housing: Reflects light for brighter lighting and matches the clean, refined look of other white CORSAIR products.
Intelligent Control, Unlimited Possibilities: Create dazzling lighting patterns and effects with powerful CORSAIR iCUE software, bringing your system to life with dynamic RGB lighting synchronized across all your iCUE compatible products.
Complete PWM Control: Dynamically control fan speed from 360 RPM to
Dimensions120.00 x 120.00 x 25.00 mm
Package Contents3 x CORSAIR LL120 RGB White fan
1 x Lighting Node PRO
1 x RGB LED Fan hub
2 x Mounting Strips for Lighting Node PRO
12 x Mounting screws
Prepravná hmotnosť0.81 kg
Rozmery balenia183 × 137 × 107 mm

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Does the 120mm frame with 25mm thickness fit my standard case mount?

Yes, the fan measures 120.00 x 120.00 x 25.00 mm, matching the common 120mm mounting pattern used on most cases and radiators.

How do I connect the three fans and the Lighting Node PRO so the RGB works in iCUE?

Plug each fan's PWM cable into the included RGB LED Fan Hub, connect the hub to a motherboard 4-pin header for speed control, then link the Lighting Node PRO to a USB 2.0 header and attach the hub's lighting cable to the Node.

When should I expect to replace the hydraulic bearings?

Hydraulic bearings are sealed and rated for long life; under normal use they typically run for years without service, and there is no user-serviceable lubrication point.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.