BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277056BTC
Skladom
Corsair
Corsair Vengeance LPX CMK32GX4M2D3600C18S 32GB (2×16GB) DDR4 3600 CL18 desktop RAM
A 32 GB dual-channel DDR4 kit with two 16 GB modules running at 3600 MT/s, CL18 timings and 1.35 V, featuring an aluminum heatspreader and Intel XMP 2.0 support
- Capacity32GB (2 x 16GB)
- Type288-Pin PC RAM
- SpeedDDR4 3600 (PC4 28800)
- CAS LatencyCL18
- Timing18-22-22-42
- Voltage1.35V
- 32 GB capacity from two 16 GB modules for multitasking headroom
- DDR4 3600 speed with CL18 latency for responsive performance
- Low 1.35 V operation reduces power draw and heat
- Aluminium heatspreader and custom PCB improve thermal management
- Intel XMP 2.0 profile enables one-click overclock setup
32GB Dual-Channel DDR4 Kit
This Corsair Vengeance LPX kit provides 32GB of desktop memory across two 16GB modules. It operates at DDR4 3600 with a CAS latency of 18 and timings of 18-22-22-42. The modules run at 1.35V and support Intel XMP 2.0 for automatic configuration. A pure aluminum heatspreader and custom PCB manage heat during high-performance overclocking.
Suited For Overclocking Builds
The kit suits enthusiasts building AMD Ryzen or Intel platforms who want factory-tested overclocking headroom. It is not for buyers who need a four-module kit to fill four slots. It is not for systems limited to voltages below 1.35V. It is not for users who require ECC error correction or registered memory for server workloads.
XMP 2.0 Automatic Profile
The single specification that decides fit is the Intel XMP 2.0 profile storing the DDR4 3600 speed and CL18 timings at 1.35V. One BIOS setting applies these validated parameters without manual tuning. If your motherboard cannot enable XMP profiles, the kit will fall back to standard JEDEC speeds instead.
Prednosti
- 32 GB capacity from two 16 GB modules for multitasking headroom
- DDR4 3600 speed with CL18 latency for responsive performance
- Low 1.35 V operation reduces power draw and heat
- Aluminium heatspreader and custom PCB improve thermal management
- Intel XMP 2.0 profile enables one-click overclock setup
Špecifikácie
| Brand | CORSAIR |
|---|---|
| Series | Vengeance LPX |
| Model | CMK32GX4M2D3600C18S |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3600 (PC4 28800) |
| CAS Latency | CL18 |
| Timing | 18-22-22-42 |
| Voltage | 1.35V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Gray |
| Features | Designed for high-performance overclocking Each VENGEANCE LPX module is built with a pure aluminum heatspreader for faster heat dissipation and cooler operation and the custom performance PCB helps manage heat and provides superior overclocking headroom. Each IC is individually screened for performance potential. Designed for great looks Available in multiple colors to match your motherboard, your components, or just your style. Performance and Compatibility VENGEANCE LPX is optimized and compatibility tested for the latest Intel 100 and 200 Series motherboards and offers higher freq |
| Recommend Use | AMD & Intel Compatible / AMD 400 Series / AMD 500 Series / AMD B450 / AMD B550 / AMD Ryzen Compatible / High Performance or Gaming Memory / Intel 200 Series / Intel 300 Series / Intel 400 Series / Intel 500 Series / Intel 600 Series / Intel B660 / Intel Compatible / Intel X299 / Intel Z270 / Intel Z370 / Intel Z390 / Intel Z490 / Intel Z590 / Intel Z690 |
| Prepravná hmotnosť | 0.10 kg |
| Rozmery balenia | 155 × 89 × 13 mm |
Otázky k tomuto produktu
Do I need a motherboard with an Intel XMP 2.0 compatible BIOS to run this 3600 MT/s kit at its rated speed?
Yes, the kit uses Intel XMP 2.0 profiles so the motherboard BIOS must support XMP 2.0 to automatically configure the 3600 MT/s frequency, CL18 timings and 1.35V voltage.
Will these two 16 GB modules run in dual-channel mode on a board that only has two DDR4 slots?
Yes, the 2 x 16 GB kit is a matched dual-channel pair and will operate in dual-channel mode on any motherboard with two or four DDR4 slots populated correctly.
How can I confirm the kit is running at the specified 3600 MT/s and CL18 timings after enabling XMP?
Enter the motherboard BIOS or use a system-information utility such as CPU-Z and check that the DRAM frequency shows 3600 MT/s with timings 18-22-22-42 at 1.35V.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
